[ckan-dev] trying a production deployment gives error when running paster --plugin ckan db init --config tmpl-ckan : TypeError: __init__() takes exactly 1 argument (2 given
Kimpe Marc
Marc.Kimpe at cronos.be
Thu Jun 30 12:46:44 UTC 2011
Hi David,
Thanks for the quick anwser ....
There is definitely a versioning problem.
I executed you suggestions, the system however insisted on using --
upgrade
and got another message :
"ValueError: VDM only works with SQLAlchemy versions 0.4 through 0.6"
SQLAlchemy seems to be upgraded in the same exercise -- making me
apparently turn into rounds since I already encountered this message
before.
--------- actions done :
(pyenv)grizzzly at tmpl-ckan:~$ rm /home/grizzzly/pyenv/lib/python2.6/
site-packages/migrate-0.2.2-py2.6.egg
rm: cannot remove `/home/grizzzly/pyenv/lib/python2.6/site-packages/
migrate-0.2.2-py2.6.egg': Is a directory
(pyenv)grizzzly at tmpl-ckan:~$
(pyenv)grizzzly at tmpl-ckan:~$
(pyenv)grizzzly at tmpl-ckan:~$
(pyenv)grizzzly at tmpl-ckan:~$ rm -rf /home/grizzzly/pyenv/lib/python2.6/
site-packages/migrate-0.2.2-py2.6.egg
(pyenv)grizzzly at tmpl-ckan:~$ pip -E pyenv install sqlalchemy-
migrate==0.6
Requirement already satisfied (use --upgrade to upgrade): sqlalchemy-
migrate==0.6 in ./pyenv/lib/python2.6/site-packages/
sqlalchemy_migrate-0.6-py2.6.egg
Requirement already satisfied (use --upgrade to upgrade):
sqlalchemy>=0.5 in ./pyenv/lib/python2.6/site-packages/
SQLAlchemy-0.6.6-py2.6.egg (from sqlalchemy-migrate==0.6)
Requirement already satisfied (use --upgrade to upgrade): decorator
in ./pyenv/lib/python2.6/site-packages/decorator-3.3.1-py2.6.egg (from
sqlalchemy-migrate==0.6)
Requirement already satisfied (use --upgrade to upgrade): tempita in ./
pyenv/lib/python2.6/site-packages/Tempita-0.5.1-py2.6.egg (from
sqlalchemy-migrate==0.6)
Cleaning up...
(pyenv)grizzzly at tmpl-ckan:~$ pip -E pyenv upgrade sqlalchemy-
migrate==0.6
Usage: pip COMMAND [OPTIONS]
pip: error: No command by the name pip upgrade
(maybe you meant "pip install upgrade")
(pyenv)grizzzly at tmpl-ckan:~$ pip -E pyenv install --upgrade sqlalchemy-
migrate==0.6
Downloading/unpacking sqlalchemy-migrate==0.6
Downloading sqlalchemy-migrate-0.6.tar.gz (98Kb): 98Kb downloaded
Running setup.py egg_info for package sqlalchemy-migrate
warning: no files found matching '*' under directory 'tests'
warning: no previously-included files matching '*pyc' found
anywhere in distribution
Downloading/unpacking sqlalchemy>=0.5 (from sqlalchemy-migrate==0.6)
Downloading SQLAlchemy-0.7.1.tar.gz (2.3Mb): 2.3Mb downloaded
Running setup.py egg_info for package sqlalchemy
warning: no files found matching '*.jpg' under directory 'doc'
no previously-included directories found matching 'doc/build/
output'
Downloading/unpacking decorator (from sqlalchemy-migrate==0.6)
Downloading decorator-3.3.1.tar.gz
Running setup.py egg_info for package decorator
warning: no previously-included files found matching 'Makefile'
Downloading/unpacking tempita (from sqlalchemy-migrate==0.6)
Downloading Tempita-0.5.1.tar.gz
Running setup.py egg_info for package tempita
Installing collected packages: sqlalchemy-migrate, sqlalchemy,
decorator, tempita
Found existing installation: sqlalchemy-migrate 0.6
Uninstalling sqlalchemy-migrate:
Successfully uninstalled sqlalchemy-migrate
Running setup.py install for sqlalchemy-migrate
warning: no files found matching '*' under directory 'tests'
warning: no previously-included files matching '*pyc' found
anywhere in distribution
Installing migrate script to /home/grizzzly/pyenv/bin
Installing migrate-repository script to /home/grizzzly/pyenv/bin
Found existing installation: SQLAlchemy 0.6.6
Uninstalling SQLAlchemy:
Successfully uninstalled SQLAlchemy
Running setup.py install for sqlalchemy
building 'sqlalchemy.cprocessors' extension
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -
Wstrict-prototypes -fPIC -I/usr/include/python2.6 -c lib/sqlalchemy/
cextension/processors.c -o build/temp.linux-i686-2.6/lib/sqlalchemy/
cextension/processors.o
gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions build/
temp.linux-i686-2.6/lib/sqlalchemy/cextension/processors.o -o build/
lib.linux-i686-2.6/sqlalchemy/cprocessors.so
building 'sqlalchemy.cresultproxy' extension
gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -
Wstrict-prototypes -fPIC -I/usr/include/python2.6 -c lib/sqlalchemy/
cextension/resultproxy.c -o build/temp.linux-i686-2.6/lib/sqlalchemy/
cextension/resultproxy.o
gcc -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions build/
temp.linux-i686-2.6/lib/sqlalchemy/cextension/resultproxy.o -o build/
lib.linux-i686-2.6/sqlalchemy/cresultproxy.so
warning: no files found matching '*.jpg' under directory 'doc'
no previously-included directories found matching 'doc/build/
output'
Found existing installation: decorator 3.3.1
Uninstalling decorator:
Successfully uninstalled decorator
Running setup.py install for decorator
warning: no previously-included files found matching 'Makefile'
Found existing installation: Tempita 0.5.1
Uninstalling Tempita:
Successfully uninstalled Tempita
Running setup.py install for tempita
Successfully installed sqlalchemy-migrate sqlalchemy decorator tempita
Cleaning up...
(pyenv)grizzzly at tmpl-ckan:~$ paster --plugin ckan db init --config
tmpl-ckan
Traceback (most recent call last):
File "/usr/bin/paster", line 18, in <module>
command.run()
File "/usr/lib/pymodules/python2.6/paste/script/command.py", line
84, in run
invoke(command, command_name, options, args[1:])
File "/usr/lib/pymodules/python2.6/paste/script/command.py", line
123, in invoke
exit_code = runner.run(args)
File "/usr/lib/pymodules/python2.6/paste/script/command.py", line
218, in run
result = self.command()
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
py2.6.egg/ckan/lib/cli.py", line 82, in command
self._load_config()
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
py2.6.egg/ckan/lib/cli.py", line 36, in _load_config
from ckan.config.environment import load_environment
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
py2.6.egg/ckan/config/environment.py", line 18, in <module>
from ckan import model
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
py2.6.egg/ckan/model/__init__.py", line 9, in <module>
from core import *
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
py2.6.egg/ckan/model/core.py", line 2, in <module>
import vdm.sqlalchemy
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/vdm-0.9-
py2.6.egg/vdm/sqlalchemy/__init__.py", line 32, in <module>
from tools import Repository
File "/home/grizzzly/pyenv/lib/python2.6/site-packages/vdm-0.9-
py2.6.egg/vdm/sqlalchemy/tools.py", line 31, in <module>
raise ValueError("VDM only works with SQLAlchemy versions 0.4
through 0.6")
ValueError: VDM only works with SQLAlchemy versions 0.4 through 0.6
(pyenv)grizzzly at tmpl-ckan:~$ pip freeze
Warning: cannot find svn location for flup==1.0.3.dev-20110405
Babel==0.9.6
Beaker==1.5.4
Brlapi==0.5.5
CouchDB==0.6
FormAlchemy==1.4
FormEncode==1.2.2
Genshi==0.6
GnuPGInterface==0.3.2
Jinja2==2.5.5
Mako==0.3.4
MarkupSafe==0.9.2
PAM==0.4.2
PIL==1.1.7
Paste==1.7.4
PasteDeploy==1.3.3
PasteScript==1.7.3
PyUtilib==3.6.2498
Pygments==1.4
Pylons==0.9.7
Routes==1.12.3
SQLAlchemy==0.7.1
Sphinx==0.6.4
Tempita==0.5.1
Twisted-Core==10.1.0
Twisted-Names==10.1.0
Twisted-Web==10.1.0
WebError==0.10.3
WebHelpers==1.2
WebOb==1.0.8
WebTest==1.2.3
adium-theme-ubuntu==0.3
apt-xapian-index==0.39
apturl==0.4.1ubuntu7
argparse==1.1
autoneg==0.5
command-not-found==0.1
configglue==0.9pre1
decorator==3.3.1
distribute==0.6.14
docutils==0.7
## FIXME: could not find svn URL in dependency_links for this package:
flup==1.0.3.dev-20110405
gnome-app-install==0.4.7ubuntu2
httplib2==0.6.0
jockey==0.5.10
launchpadlib==1.6.1
lazr.restfulclient==0.9.20
lazr.uri==1.0.2
licenses==0.6
louis==2.0.0
lxml==2.2.4
mercurial==1.6.3
mod-python==3.3.1
nose==1.0.0
nvidia-common==0.0.0
oauth==1.0a
onboard==0.94.0
papyon==0.5.1
pexpect==2.3
protobuf==2.3.0
psutil==0.2.1
psycopg2==2.0.13
pyOpenSSL==0.10
pycrypto==2.0.1
pycups==1.9.51
pycurl==7.19.0
pyinotify==0.8.9
pyserial==2.3
pysmbc==1.0.8
python-apt==0.7.96.1ubuntu11
python-debian==0.1.16ubuntu1
python-openid==2.2.4
python-virtkey==0.60.0
pyutilib.R==3.0.5
pyutilib.autotest==1.4.6
pyutilib.common==3.0.5
pyutilib.component.app==3.1.6
pyutilib.component.config==3.3.2
pyutilib.component.core==4.3.1
pyutilib.component.doc==1.0.1
pyutilib.component.executables==3.4.1
pyutilib.component.loader==3.3.1
pyutilib.dev==1.15.2
pyutilib.enum==1.0.7
pyutilib.excel==3.0.6
pyutilib.math==3.0.6
pyutilib.misc==4.6
pyutilib.ply==3.0.6
pyutilib.pyro==3.3
pyutilib.services==3.3.1
pyutilib.subprocess==3.2.3
pyutilib.svn==1.0.1
pyutilib.th==5.0
pyutilib.virtualenv==2.5
pyutilib.workflow==2.2.4
pyxdg==0.19
rdflib==2.4.2
repoze.who==2.0b1
scgi==1.13
screen-resolution-extra==0.0.0
sessioninstaller==0.0.0
simplejson==2.1.1
speechd==0.3
speechd-config==0.0
sqlalchemy-migrate==0.6
system-service==0.1.6
ubuntu-sso-client==1.0.3
ubuntuone-storage-protocol==1.4.0
ufw==0.30.0-1ubuntu2
unattended-upgrades==0.1
unittest2==0.5.1
usb-creator==0.2.23
vdm==0.9
virtualenv==1.6.1
wadllib==1.1.4
wsgiref==0.1.2
xkit==0.0.0
zope.interface==3.6.1
(pyenv)grizzzly at tmpl-ckan:~$
--------------- requirements.txt used :
(pyenv)grizzzly at tmpl-ckan:~$ cat var/srvc/tmpl-ckan/*.txt
# These are packages where we require a different version of a package
from
# the one in Lucid. Rather than packaging a backport which could
potentially
# interfere with a user's other installed software, we put these
modules into
# a single location which CKAN imports from in preference to the Lucid
# equivalent.
Genshi>=0.6,<0.6.99
sqlalchemy-migrate==0.6
sqlalchemy==0.6.6
webhelpers==1.2
# NOTE: Developers, our build script for the Debian packages relies on
the
# requirements above being specified as editable resources with
their
# mercurial, SVN or git repository specified at the correct
revision to
# package.
# These are packages that we rely on that aren't present in Lucid. We
package
# them and put them in our own CKAN repository
# pyutilib.component.core>=4.1,<4.1.99
-e svn+https://software.sandia.gov/svn/public/pyutilib/pyutilib.component.core/trunk@1972#egg=pyutilib.component.core
# licenses==0.4,<0.6.99
-e hg+https://bitbucket.org/okfn/licenses@0eed4a13296b#egg=licenses
# vdm>=0.9,<0.9.99
-e hg+https://bitbucket.org/okfn/vdm@vdm-0.9#egg=vdm
# markupsafe==0.9.2 required by webhelpers==1.2 required by
formalchemy with SQLAlchemy 0.6
-e git+https://github.com/mitsuhiko/markupsafe.git@0.9.2#egg=markupsafe
# autoneg>=0.5
-e git+https://github.com/wwaites/autoneg.git@b4c727b164f411cc9d60#egg=autoneg
# flup>=0.5
-e hg+http://hg.saddi.com/flup@301a58656bfb#egg=flup
# All the conflicting dependencies from the lucid_conflict.txt file
-e hg+https://bitbucket.org/okfn/ckan-deps@6287665a1965#egg=ckan-deps
# FormAlchemy
-e git+https://github.com/FormAlchemy/formalchemy.git@1.3.9#egg=formalchemy
# NOTE: Developers, our build script for the Debian packages relies on
the
# requirements above being specified as editable resources with
their
# mercurial, SVN or git repository specified at the correct
revision to
# package
# These CKAN dependencies are already in Lucid and should be installed
via
# apt-get if you are on that platform. If you are using a different
platform
# you can install these dependencies via pip instead.
#
# sudo apt-get install python-psycopg2 python-lxml python-sphinx
python-pybabel
# sudo apt-get install python-pylons python-formalchemy python-
repoze.who
# sudo apt-get install python-repoze.who-plugins python-tempita python-
zope.interface
babel==0.9.4
psycopg2==2.0.13
lxml==2.2.4
sphinx==0.6.4
Pylons==0.9.7
repoze.who==1.0.18
tempita==0.4
zope.interface==3.5.3
# These are both combined into the python-repoze.who-plugins package
repoze.who.plugins.openid
# Actually from python-repoze.who-plugins but the openid plugin in the
same
# package is too old
repoze.who-friendlyform==1.0.8
routes==1.11
paste==1.7.2
pastescript==1.7.3
# NOTE: Developers, please do not edit the versions, these versions
are fixed
# in Lucid. If you start to depend on a different vesion you'll
need to
# remove the version here and package your version as a conflict.
# This file allows you to install CKAN and all its dependencies
# in a virtual environment.
#
# Use it like this:
#
# pip install --ignore-installed -r pip-requirements.txt
-e hg+https://bitbucket.org/okfn/ckan@default#egg=ckan
# CKAN dependencies
-r https://bitbucket.org/okfn/ckan/raw/default/requires/lucid_conflict.txt
-r https://bitbucket.org/okfn/ckan/raw/default/requires/lucid_present.txt
-r https://bitbucket.org/okfn/ckan/raw/default/requires/lucid_missing.txt
# NOTE: Developers, please do not edit this file. Changes should go in
the
# appropriate files in the `requires' directory.
So there must be a golden sequence of install different from : http://packages.python.org/ckan/deployment.html
Can you help ?
mvg,
Marc
On 30 Jun 2011, at 14:31, David Read wrote:
> Hi Marc,
>
> Thanks for the detailed info - this really helps. It looks like you
> have got the old sqlalchemy-migrate version 0.2.2 installed into your
> python environment, when you need v0.6.
>
> To fix the issue I suggest you "rm
> /home/grizzzly/pyenv/lib/python2.6/site-packages/migrate-0.2.2-
> py2.6.egg"
> and reinstall with "pip -E pyenv install sqlalchemy-migrate==0.6".
>
> To work out what as gone wrong, can you show us your
> pip-requirements.txt you used in step 6 please? This should reference
> a particular version of lucid_conflict.txt which contains the
> reference to "sqlalchemy-migrate==0.6".
>
> David
>
> On 30 June 2011 12:04, Kimpe Marc <Marc.Kimpe at cronos.be> wrote:
>> Resending after subscription.
>>
>> Thanks,
>>
>> Marc
>>
>>
>> On 29 Jun 2011, at 15:30, Kimpe Marc wrote:
>>
>>> Hi,
>>>
>>>
>>> In order to prepare for a new open data site, I'm trying to follow
>>> the
>>> procedure in
>>> http://packages.python.org/ckan/deployment.html
>>> on a Ubuntu :
>>> Linux tmpl-ckan 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50
>>> UTC 2010 i686 GNU/Linux
>>>
>>>
>>> I got to the stage were I try to initialize the database with
>>> running :
>>>
>>> paster --plugin ckan db init --config tmpl-ckan
>>>
>>> However this gives me an error :
>>>
>>> (pyenv)grizzzly at tmpl-ckan:~$ paster --plugin ckan db init --config
>>> tmpl-ckan
>>> /home/grizzzly/pyenv/lib/python2.6/site-packages/migrate-0.2.2-
>>> py2.6.egg/migrate/versioning/unique_instance.py:19:
>>> DeprecationWarning: object.__new__() takes no parameters
>>> instances[key] = super(UniqueInstance,cls).__new__(cls,*p,**k)
>>> Traceback (most recent call last):
>>> File "/usr/bin/paster", line 18, in <module>
>>> command.run()
>>> File "/usr/lib/pymodules/python2.6/paste/script/command.py", line
>>> 84, in run
>>> invoke(command, command_name, options, args[1:])
>>> File "/usr/lib/pymodules/python2.6/paste/script/command.py", line
>>> 123, in invoke
>>> exit_code = runner.run(args)
>>> File "/usr/lib/pymodules/python2.6/paste/script/command.py", line
>>> 218, in run
>>> result = self.command()
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
>>> py2.6.egg/ckan/lib/cli.py", line 87, in command
>>> model.repo.init_db()
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
>>> py2.6.egg/ckan/model/__init__.py", line 70, in init_db
>>> self.upgrade_db()
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/ckan-1.4.1-
>>> py2.6.egg/ckan/model/__init__.py", line 168, in upgrade_db
>>> import migrate.versioning.api as mig
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/api.py", line 5, in
>>> <module>
>>> from migrate.versioning.repository import *
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/repository.py", line 8,
>>> in
>>> <module>
>>> from migrate.versioning import script,exceptions,version
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/script/__init__.py", line
>>> 1, in <module>
>>> from py import *
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/script/py.py", line 2, in
>>> <module>
>>> from logsql import LogsqlFile
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/script/logsql.py", line
>>> 2,
>>> in <module>
>>> from migrate.versioning import logengine
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/logengine.py", line
>>> 260, in
>>> <module>
>>> LogEngineStrategy()
>>> File "/home/grizzzly/pyenv/lib/python2.6/site-packages/
>>> migrate-0.2.2-py2.6.egg/migrate/versioning/logengine.py", line
>>> 253, in
>>> __init__
>>> super(LogEngineStrategy,self).__init__('logsql')
>>> TypeError: __init__() takes exactly 1 argument (2 given)
>>>
>>>
>>> Here are the versions PIP reports currently :
>>>
>>> (pyenv)grizzzly at tmpl-ckan:~$ pip freeze
>>> Warning: cannot find svn location for flup==1.0.3.dev-20110405
>>> Babel==0.9.6
>>> Beaker==1.5.4
>>> Brlapi==0.5.5
>>> CouchDB==0.6
>>> FormAlchemy==1.4
>>> FormEncode==1.2.2
>>> Genshi==0.6
>>> GnuPGInterface==0.3.2
>>> Jinja2==2.5.5
>>> Mako==0.3.4
>>> MarkupSafe==0.9.2
>>> PAM==0.4.2
>>> PIL==1.1.7
>>> Paste==1.7.4
>>> PasteDeploy==1.3.3
>>> PasteScript==1.7.3
>>> PyUtilib==3.6.2498
>>> Pygments==1.4
>>> Pylons==0.9.7
>>> Routes==1.12.3
>>> SQLAlchemy==0.6.6
>>> Sphinx==0.6.4
>>> Tempita==0.5.1
>>> Twisted-Core==10.1.0
>>> Twisted-Names==10.1.0
>>> Twisted-Web==10.1.0
>>> WebError==0.10.3
>>> WebHelpers==1.2
>>> WebOb==1.0.8
>>> WebTest==1.2.3
>>> adium-theme-ubuntu==0.3
>>> apt-xapian-index==0.39
>>> apturl==0.4.1ubuntu7
>>> argparse==1.1
>>> autoneg==0.5
>>> command-not-found==0.1
>>> configglue==0.9pre1
>>> decorator==3.3.1
>>> distribute==0.6.14
>>> docutils==0.7
>>> ## FIXME: could not find svn URL in dependency_links for this
>>> package:
>>> flup==1.0.3.dev-20110405
>>> gnome-app-install==0.4.7ubuntu2
>>> httplib2==0.6.0
>>> jockey==0.5.10
>>> launchpadlib==1.6.1
>>> lazr.restfulclient==0.9.20
>>> lazr.uri==1.0.2
>>> licenses==0.6
>>> louis==2.0.0
>>> lxml==2.2.4
>>> mercurial==1.6.3
>>> migrate==0.2.2
>>> mod-python==3.3.1
>>> nose==1.0.0
>>> nvidia-common==0.0.0
>>> oauth==1.0a
>>> onboard==0.94.0
>>> papyon==0.5.1
>>> pexpect==2.3
>>> protobuf==2.3.0
>>> psutil==0.2.1
>>> psycopg2==2.0.13
>>> pyOpenSSL==0.10
>>> pycrypto==2.0.1
>>> pycups==1.9.51
>>> pycurl==7.19.0
>>> pyinotify==0.8.9
>>> pyserial==2.3
>>> pysmbc==1.0.8
>>> python-apt==0.7.96.1ubuntu11
>>> python-debian==0.1.16ubuntu1
>>> python-openid==2.2.4
>>> python-virtkey==0.60.0
>>> pyutilib.R==3.0.5
>>> pyutilib.autotest==1.4.6
>>> pyutilib.common==3.0.5
>>> pyutilib.component.app==3.1.6
>>> pyutilib.component.config==3.3.2
>>> pyutilib.component.core==4.3.1
>>> pyutilib.component.doc==1.0.1
>>> pyutilib.component.executables==3.4.1
>>> pyutilib.component.loader==3.3.1
>>> pyutilib.dev==1.15.2
>>> pyutilib.enum==1.0.7
>>> pyutilib.excel==3.0.6
>>> pyutilib.math==3.0.6
>>> pyutilib.misc==4.6
>>> pyutilib.ply==3.0.6
>>> pyutilib.pyro==3.3
>>> pyutilib.services==3.3.1
>>> pyutilib.subprocess==3.2.3
>>> pyutilib.svn==1.0.1
>>> pyutilib.th==5.0
>>> pyutilib.virtualenv==2.5
>>> pyutilib.workflow==2.2.4
>>> pyxdg==0.19
>>> rdflib==2.4.2
>>> repoze.who==2.0b1
>>> scgi==1.13
>>> screen-resolution-extra==0.0.0
>>> sessioninstaller==0.0.0
>>> simplejson==2.1.1
>>> speechd==0.3
>>> speechd-config==0.0
>>> sqlalchemy-migrate==0.6
>>> system-service==0.1.6
>>> ubuntu-sso-client==1.0.3
>>> ubuntuone-storage-protocol==1.4.0
>>> ufw==0.30.0-1ubuntu2
>>> unattended-upgrades==0.1
>>> unittest2==0.5.1
>>> usb-creator==0.2.23
>>> vdm==0.9
>>> virtualenv==1.6.1
>>> wadllib==1.1.4
>>> wsgiref==0.1.2
>>> xkit==0.0.0
>>> zope.interface==3.6.1
>>> (pyenv)grizzzly at tmpl-ckan:~$
>>>
>>> Except for the database login the tmpl-ckan is the standard
>>> generated
>>>
>>>
>>> What is wrong ?
>>>
>>>
>>> Many thanks,
>>>
>>> Marc
>>>
>>>
>>
>>
>> _______________________________________________
>> ckan-dev mailing list
>> ckan-dev at lists.okfn.org
>> http://lists.okfn.org/mailman/listinfo/ckan-dev
>>
More information about the ckan-dev
mailing list