[ckan-dev] Updating Solr to support point search and confusion with Spatial Search Widget

• Previous message: [ckan-dev] Updating Solr to support point search and confusion with Spatial Search Widget
• Next message: [ckan-dev] Updating Solr to support point search and confusion with Spatial Search Widget
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Sure, I just wanted to check.
Thanks again, I will try to fix the spatial search today and let you know
what happened.

Sent from my mobile device
On Jul 23, 2015 08:06, "李承錱[Sol]" <u103133.u103135 at gmail.com> wrote:

> Hi Filip:
>
> I installed PostgreSQL 9.3.9 and postgresql-9.3-postgis-2.1 with apt-get
> just like what you have stated. But I thought your problem would not be
> related with postgis since you used the solr-spatial-field backend.
>
>
> Cheers,
>
> Sol
>
> 2015-07-23 13:51 GMT+08:00 Filip Radulovic <filiprd at gmail.com>:
>
>> Hi Sol,
>>
>> Thanks a lot for the comment. Since I haven't made it work yet, I decided
>> to install spatial extension from scratch today so your comment is very
>> helpful and came in the right moment. I used Solr 4.0.0 but I'll try with
>> 5.1.0.
>>
>> Just one thing, which version of PostgreSQL and PostGIS you have? Mine
>> PostgreSQL is installed with apt-get as suggested in CKAN installation
>> instruction, and I did the same with PostGIS but I had to add version
>> because the command from the instructions did not work (sudo apt-get
>> install postgresql-9.3-postgis-2.1, note "-2.1" at the end).
>>
>> I will update when I finish reinstallation.
>>
>> Cheers
>>
>> Sent from my mobile device
>> On Jul 23, 2015 06:19, "李承錱[Sol]" <u103133.u103135 at gmail.com> wrote:
>>
>>> Hi Filip:
>>>
>>> For debugging purposes, my suggestion is to check the solr log directly
>>> since it is much easier to read. The log is located at
>>> http://YOUR-SERVER-IP/solr/#/~logging.
>>>
>>> Not sure what caused your problem, but I just finished a CKAN 2.3 + Solr
>>> 5.1.0 + ckanext-spatial with solr-spatial-field backend installation on a
>>> Ubuntu 14.04 machine. Both indexing and searching (point, bbox and polygon)
>>> have worked well so far.
>>>
>>> The following links are some installation notes:
>>>
>>> 1. Install Solr 5 for CKAN 2.3:
>>> https://gist.github.com/u10313335/1cd42194992c501fe5c6
>>> 2. ckanext-spatial w/ solr-spatial-field backend
>>> https://gist.github.com/u10313335/5649488bc3a4037e1357
>>>
>>> (Note: I did not use the latest 5.2.1 version because it may fail when
>>> restarting. For details, see https://github.com/ckan/ckan/issues/2524.)
>>>
>>> Hope that helps.
>>>
>>>
>>> Cheers,
>>>
>>> Sol
>>>
>>> 2015-07-22 23:11 GMT+08:00 Filip Radulovic <filiprd at gmail.com>:
>>>
>>>> Hi all,
>>>>
>>>> So, another update: Instead of updating search index with
>>>> solr-spatial-field backend in development.ini, I have first done an update
>>>> with solr backend and then another search index update with
>>>> solr-spatial-field. The search index was updated without errors, all
>>>> datasets are listed in search, and adding points/polygons to spatial
>>>> attribute in dataset does not generate any errors.
>>>>
>>>> However, the spatial search widget still does not show any results when
>>>> performing search (with solr-spatial-field configuration). Did anyone have
>>>> the same problem? Does spatial search work in your case?
>>>>
>>>> Cheers
>>>>
>>>>
>>>>
>>>>
>>>> --------
>>>> Filip Radulovic
>>>> www.filip.milstan.net
>>>>
>>>> On Wed, Jul 22, 2015 at 3:38 PM, Filip Radulovic <filiprd at gmail.com>
>>>> wrote:
>>>>
>>>>> Small update: Updating indexes failed when doing it with
>>>>> solr-spatial-field backend (my previous email).
>>>>> If I go back to the state before breaking the index (I am doing
>>>>> everything in VM and have backups) and update the index with solr as
>>>>> backend, it just states the error with points and polygons, but it works
>>>>> and all datasets show in search after.
>>>>> Still, when doing search with spatial widget (solr backend) after
>>>>> updating search index the following new error appears:
>>>>>
>>>>> 2015-07-22 15:29:57,597 ERROR [ckan.controllers.package] Dataset
>>>>> search error: ('SOLR returned an error running query: {\'sort\': u\'score
>>>>> desc, metadata_modified desc\', \'fq\': [u\'+dataset_type:dataset
>>>>> capacity:"public" +site_id:"oeg-otalex" +state:active\', \'{!frange
>>>>> incl=false l=0
>>>>> u=1}div(mul(mul(max(0,sub(min(125.859375,maxx),max(-35.15625,minx))),max(0,sub(min(63.2336274123,maxy),max(-21.2893743559,miny)))),2),add(13609.5239566,mul(sub(maxy,miny),sub(maxx,minx))))\'],
>>>>> \'bf\':
>>>>> \'div(mul(mul(max(0,sub(min(125.859375,maxx),max(-35.15625,minx))),max(0,sub(min(63.2336274123,maxy),max(-21.2893743559,miny)))),2),add(13609.5239566,mul(sub(maxy,miny),sub(maxx,minx))))\',
>>>>> \'rows\': 21, \'facet.field\': [\'organization\', \'groups\', \'tags\',
>>>>> \'res_format\', \'license_id\'], \'facet.limit\': \'50\', \'mm\': \'2<-1
>>>>> 5<80%\', \'defType\': \'edismax\', \'facet.mincount\': 1, \'q\': \'*:*\',
>>>>> \'start\': 0, \'wt\': \'json\', \'qf\': \'name^4 title^4 tags^2 groups^2
>>>>> text\', \'tie\': \'0.1\', \'facet\': \'true\', \'fl\': \'id
>>>>> validated_data_dict\', \'fq_list\': [\'{!frange incl=false l=0
>>>>> u=1}div(mul(mul(max(0,sub(min(125.859375,maxx),max(-35.15625,minx))),max(0,sub(min(63.2336274123,maxy),max(-21.2893743559,miny)))),2),add(13609.5239566,mul(sub(maxy,miny),sub(maxx,minx))))\']}
>>>>> Error: \'Internal Server Error\'',)
>>>>>
>>>>> I am doing my best to figure it out and fix widget search to work
>>>>> properly with solr-spatial-field and points. If I manage I will share the
>>>>> experience, but I tried a bunch of stuff and I am afraid I don't have any
>>>>> more ideas.
>>>>>
>>>>>
>>>>>
>>>>> --------
>>>>> Filip Radulovic
>>>>> www.filip.milstan.net
>>>>>
>>>>> On Wed, Jul 22, 2015 at 1:56 PM, Filip Radulovic <filiprd at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi Tanmay,
>>>>>>
>>>>>> Thanks for your response. I have tried to update search index but it
>>>>>> failed. I get the following error:
>>>>>>
>>>>>> Unable to update search index.('Solr returned an error: 400 Bad
>>>>>> Request - <?xml version="1.0" encoding="UTF-8"?>\n<response>\n<lst
>>>>>> name="responseHeader"><int name="status">400</int><int
>>>>>> name="QTime">5</int></lst><lst name="error"><str name="msg">ERROR:
>>>>>> [doc=46f47f41e48f6135af991236e300c6d6] Error adding field
>>>>>> \'spatial_geom\'=\'POINT (13.383333 52.516666)\' msg=Unable to read: POINT
>>>>>> (13.383333 52.516666)</str><int
>>>>>> name="code">400</int></lst>\n</response>\n',)
>>>>>>
>>>>>> The same error happens when using CKAN in the browser when trying to
>>>>>> add or update a dataset with spatial attribute.
>>>>>> I did not have that error before I updated Solr. Does anyone know
>>>>>> what might be the problem? I've trying to find a solution the whole morning
>>>>>> but failed.
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>>
>>>>>>
>>>>>> --------
>>>>>> Filip Radulovic
>>>>>> www.filip.milstan.net
>>>>>>
>>>>>> On Wed, Jul 22, 2015 at 1:44 AM, Tanmay Thakur <tthakur at accela.com>
>>>>>> wrote:
>>>>>>
>>>>>>>   Hi Filip,
>>>>>>> You might want to try rebuilding the search-index.
>>>>>>>
>>>>>>> paster --plugin=ckan search-index rebuild --config=/etc/ckan/std/std.ini
>>>>>>>
>>>>>>>  For more details, see:
>>>>>>>
>>>>>>> http://docs.ckan.org/en/1117-start-new-test-suite/paster.html#search-index-rebuild-search-index
>>>>>>>
>>>>>>>
>>>>>>>  Regards,
>>>>>>> Tanmay Thakur
>>>>>>> Software Engineer
>>>>>>>  <http://www.accela.com/>
>>>>>>>
>>>>>>>   From: ckan-dev <ckan-dev-bounces at lists.okfn.org> on behalf of
>>>>>>> Filip Radulovic <filiprd at gmail.com>
>>>>>>> Reply-To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>>>>>>> Date: Tuesday, July 21, 2015 at 3:22 PM
>>>>>>> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>>>>>>> Subject: Re: [ckan-dev] Updating Solr to support point search and
>>>>>>> confusion with Spatial Search Widget
>>>>>>>
>>>>>>>   Hi all,
>>>>>>>
>>>>>>>  I have managed to install another version of Solr (4.0.0) and to
>>>>>>> put CKAN to work with it.
>>>>>>> From what I can see it works fine, the only problem is that CKAN now
>>>>>>> does not recognise in search any datasets that I previously uploaded (only
>>>>>>> the new ones). Anyone has an idea about why is that?
>>>>>>>
>>>>>>>  In my user profile I can see and access all datasets, including
>>>>>>> the old ones.
>>>>>>>
>>>>>>>
>>>>>>>  For future reference, what I did is this:
>>>>>>> - uninstall solr-jetty (apt-get command)
>>>>>>> - install jetty only (apt-get command)
>>>>>>> - manually downloading Solr and install it (see for example here
>>>>>>> <http://www.kingstonlabs.com/blog/how-to-install-solr-36-on-ubuntu-1204/>
>>>>>>> )
>>>>>>> - setting up the schema.xml via symlink to CKAN file (similarly as
>>>>>>> in the CKAN installation instructions)
>>>>>>> - changing solr_url in development.ini to
>>>>>>> 127.0.0.1:8983/solr/sitename
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>  --------
>>>>>>> Filip Radulovic
>>>>>>> www.filip.milstan.net
>>>>>>>
>>>>>>> On Tue, Jul 21, 2015 at 8:00 PM, Filip Radulovic <filiprd at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi all,
>>>>>>>>
>>>>>>>>  I have installed CKAN on Ubuntu 14.04, and I've added
>>>>>>>> ckanext-spatial extension with the Spatial Search Widget and Dataset Extent
>>>>>>>> Map.
>>>>>>>> I have added a few datasets with extra attribute with 'spatial' key
>>>>>>>> and both points and polygons.
>>>>>>>>
>>>>>>>>  Now, both are shown very nice in Dataset Extend Map, but when I
>>>>>>>> try to filter datasets in search, only those that have a polygon associated
>>>>>>>> with them are shown in results.
>>>>>>>>
>>>>>>>>  Form the installation instructions, it says that polygons and
>>>>>>>> points are supported in solr-spatial-field backend (which requires solr
>>>>>>>> 4.x+), but I am using solr backend (with solr 3.6.2 that came with running
>>>>>>>> apt-get as specified in installation instructions). The thing is that first
>>>>>>>> I tried to update solr to 4.0.0 but I failed, and only then I realised that
>>>>>>>> search with polygons is working, but not with points.
>>>>>>>>
>>>>>>>>  So I am confused. How come the search is working with polygons at
>>>>>>>> all if I don't have the right solr version and I haven't even put JTS, and
>>>>>>>> how to enable the search to take into account datasets with point.
>>>>>>>>
>>>>>>>>  Maybe another question is how to update solr - the repository
>>>>>>>> does not have other versions, and I couldn't do it manually because I could
>>>>>>>> not find related folders and files in solr and jetty?
>>>>>>>> Anyone has a clue how to proceed?
>>>>>>>>
>>>>>>>>  If it helps, I list here the output with an error in the console
>>>>>>>> that I get when adding a dataset with spatial attribute which is a point (I
>>>>>>>> don't see the same error when adding a polygon).
>>>>>>>>
>>>>>>>>  2015-07-21 19:49:29,922 DEBUG [ckanext.spatial.plugin] Received:
>>>>>>>> u'{ "type": "Point", "coordinates": [-3.716667,40.383335] }'
>>>>>>>> 2015-07-21 19:49:29,956 DEBUG [ckanext.spatial.lib] Extent for
>>>>>>>> package 10f6c260-76d8-481e-8f75-a7bc3e9735d2 unchanged
>>>>>>>> 2015-07-21 19:49:31,470 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/resource_show render time 0.037 seconds
>>>>>>>> 2015-07-21 19:49:31,942 DEBUG [ckanext.spatial.plugin] Received:
>>>>>>>> u'{ "type": "Point", "coordinates": [-3.716667,40.383335] }'
>>>>>>>> 2015-07-21 19:49:32,000 DEBUG [ckanext.spatial.lib] Extent for
>>>>>>>> package 10f6c260-76d8-481e-8f75-a7bc3e9735d2 unchanged
>>>>>>>> 2015-07-21 19:49:32,633 ERROR [ckanext.spatial.plugin] Solr backend
>>>>>>>> only supports bboxes, ignoring geometry { "type": "Point", "coordinates":
>>>>>>>> [-3.716667,40.383335] }
>>>>>>>> 2015-07-21 19:49:33,393 INFO  [ckan.lib.base]
>>>>>>>>  /dataset/new_resource/bristol-energy-in-buildings render time 3.790 seconds
>>>>>>>> 2015-07-21 19:49:33,403 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/resource_show render time 0.231 seconds
>>>>>>>> /usr/lib/ckan/default/local/lib/python2.7/site-packages/sqlalchemy/engine/default.py:459:
>>>>>>>> SAWarning: Unicode type received non-unicode bind param value.
>>>>>>>>   param.append(processors[key](compiled_params[key]))
>>>>>>>> Fetching from:
>>>>>>>> http://127.0.0.1:5000/dataset/10f6c260-76d8-481e-8f75-a7bc3e9735d2/resource/faaacf90-e43a-4c34-892e-5c770d41e863/download/Bristol.csv
>>>>>>>> 2015-07-21 19:49:33,966 WARNI [ckan.lib.maintain] Function
>>>>>>>> _resource_preview() in module ckan.controllers.package has been deprecated
>>>>>>>> and will be removed in a later release of ckan. Resource preview is
>>>>>>>> deprecated. Please use the new resource views
>>>>>>>> 2015-07-21 19:49:34,464 INFO  [ckan.lib.base]
>>>>>>>>  /dataset/10f6c260-76d8-481e-8f75-a7bc3e9735d2/resource/faaacf90-e43a-4c34-892e-5c770d41e863/download/Bristol.csv
>>>>>>>> render time 0.196 seconds
>>>>>>>> 2015-07-21 19:49:34,620 WARNI [ckan.lib.maintain] Function
>>>>>>>> get_action() in module ckan.lib.helpers has been deprecated and will be
>>>>>>>> removed in a later release of ckan. helpers.get_action() is deprecated and
>>>>>>>> will be removed in a future version of CKAN. Instead, please use the
>>>>>>>> extra_vars param to render() in your controller to pass results from action
>>>>>>>> functions to your templates.
>>>>>>>> 2015-07-21 19:49:35,513 WARNI [ckan.lib.maintain] Function
>>>>>>>> get_action() in module ckan.lib.helpers has been deprecated and will be
>>>>>>>> removed in a later release of ckan. helpers.get_action() is deprecated and
>>>>>>>> will be removed in a future version of CKAN. Instead, please use the
>>>>>>>> extra_vars param to render() in your controller to pass results from action
>>>>>>>> functions to your templates.
>>>>>>>> Deleting "faaacf90-e43a-4c34-892e-5c770d41e863" from datastore.
>>>>>>>> 2015-07-21 19:49:36,837 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datastore_delete render time 0.063 seconds
>>>>>>>> Determined headers and types: [{'type': u'timestamp', 'id':
>>>>>>>> u'date_time'}, {'type': u'numeric', 'id': u'consumption'}, {'type':
>>>>>>>> u'text', 'id': u'Intervention'}, {'type': u'text', 'id': u'Building'},
>>>>>>>> {'type': u'text', 'id': u'Energy'}, {'type': u'text', 'id': u'City'}]
>>>>>>>> Saving chunk 0
>>>>>>>> 2015-07-21 19:49:37,919 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/resource_show render time 0.425 seconds
>>>>>>>> Fetching from:
>>>>>>>> http://127.0.0.1:5000/dataset/10f6c260-76d8-481e-8f75-a7bc3e9735d2/resource/faaacf90-e43a-4c34-892e-5c770d41e863/download/Bristol.csv
>>>>>>>> 2015-07-21 19:49:38,150 INFO  [ckan.lib.base]
>>>>>>>>  /dataset/bristol-energy-in-buildings render time 4.359 seconds
>>>>>>>> 2015-07-21 19:49:39,227 INFO  [ckan.lib.base]
>>>>>>>>  /dataset/10f6c260-76d8-481e-8f75-a7bc3e9735d2/resource/faaacf90-e43a-4c34-892e-5c770d41e863/download/Bristol.csv
>>>>>>>> render time 0.412 seconds
>>>>>>>> Deleting "faaacf90-e43a-4c34-892e-5c770d41e863" from datastore.
>>>>>>>> 2015-07-21 19:49:40,568 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datastore_create render time 2.245 seconds
>>>>>>>> Saving chunk 1
>>>>>>>> 2015-07-21 19:49:41,267 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datastore_delete render time 0.313 seconds
>>>>>>>> Determined headers and types: [{'type': u'timestamp', 'id':
>>>>>>>> u'date_time'}, {'type': u'numeric', 'id': u'consumption'}, {'type':
>>>>>>>> u'text', 'id': u'Intervention'}, {'type': u'text', 'id': u'Building'},
>>>>>>>> {'type': u'text', 'id': u'Energy'}, {'type': u'text', 'id': u'City'}]
>>>>>>>> 2015-07-21 19:49:41,629 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datastore_create render time 0.394 seconds
>>>>>>>> Successfully pushed 274 entries to
>>>>>>>> "faaacf90-e43a-4c34-892e-5c770d41e863".
>>>>>>>> Saving chunk 0
>>>>>>>> 2015-07-21 19:49:42,479 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datapusher_hook render time 0.338 seconds
>>>>>>>> 2015-07-21 19:49:42,946 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datastore_create render time 0.396 seconds
>>>>>>>> Saving chunk 1
>>>>>>>> 2015-07-21 19:49:43,975 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datastore_create render time 0.692 seconds
>>>>>>>> Successfully pushed 274 entries to
>>>>>>>> "faaacf90-e43a-4c34-892e-5c770d41e863".
>>>>>>>> 2015-07-21 19:49:44,235 INFO  [ckan.lib.base]  /api/i18n/en render
>>>>>>>> time 0.003 seconds
>>>>>>>> 2015-07-21 19:49:44,652 INFO  [ckan.lib.base]
>>>>>>>>  /api/3/action/datapusher_hook render time 0.169 seconds
>>>>>>>>
>>>>>>>>
>>>>>>>>  Cheers
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> ckan-dev mailing list
>>>>>>> ckan-dev at lists.okfn.org
>>>>>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>>>>>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> ckan-dev mailing list
>>>> ckan-dev at lists.okfn.org
>>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> ckan-dev mailing list
>>> ckan-dev at lists.okfn.org
>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>>>
>>>
>> _______________________________________________
>> ckan-dev mailing list
>> ckan-dev at lists.okfn.org
>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>>
>>
>
> _______________________________________________
> ckan-dev mailing list
> ckan-dev at lists.okfn.org
> https://lists.okfn.org/mailman/listinfo/ckan-dev
> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/71e889ee/attachment-0003.html>

• Previous message: [ckan-dev] Updating Solr to support point search and confusion with Spatial Search Widget
• Next message: [ckan-dev] Updating Solr to support point search and confusion with Spatial Search Widget
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]