[Open Design + Hardware] opendesign Digest, Vol 50, Issue 4

Tue Jan 31 17:06:19 UTC 2017

Hi all,

Would like to say this is a great topic and lots of interesting stuff to
chew over so thank you. I have a shameless project plug of my own. I am
currently working on a feasibility study into the role of make spaces in
the circular economy. We are working with textile surplus in Scottish
textile manufacturers and two micro manufacturers. The model we are
adopting produces open source garments. Just about to host our second
re-make-a-thon! Link to our project blog below. It only has a few posts
juts now but we will update as we go along.

https://remantleandmake.wordpress.com

Paul

On Tue, Jan 31, 2017 at 4:22 PM, Christian Villum <villum at autofunk.dk>
wrote:

> Greg,
>
> Thanks for chipping in. I agree that it's time to crack the nut on open
> source hardware business models to allow for much wider adoption. Hopefully
> we can help that happen with the REMODEL venture.
>
> We'll share our progress and setbacks here on the list and would enjoy
> continued feedback. Any ideas, comments and viewpoints - now and further
> down the line - are more than welcome.
>
> -Christian
>
> On 30 January 2017 at 14:18, Greg Austic <gbathree at gmail.com> wrote:
>
>> I don't know if i can make that conference, though it's very close to me
>> (Ann Arbor MI) perhaps I should try, but I just wanted to say thanks for
>> bringing it up.  In my opinion, the business model is the thing that is
>> most holding open source hardware back from scaling the way open software
>> did and continues to do.  It's been one of the major topics of last years
>> Gathering for Open Science Hardware and I expect will be again this year.
>>
>> As someone who's trying and failing and trying again to make business
>> models work in open science hardware, I'd just love more peers + discussion
>> + support.
>>
>> Greg
>>
>> On Mon, Jan 30, 2017 at 3:52 AM, Christian Villum <villum at autofunk.dk>
>> wrote:
>>
>>> Thanks Peter - adding to top of reading list right away.
>>>
>>> @everyone else: Please don't hold back on shameless self-promotion
>>> either ;-)
>>>
>>> Cheers,
>>>
>>> Christian
>>>
>>>
>>> man. 30. jan. 2017 kl. 08.34 skrev Dr. Peter Troxler <trox at fabfolk.com>:
>>>
>>>> Warning: shameless self-promotion ahead:
>>>>
>>>> Regarding the business model 101 my recent research might be of
>>>> interest:
>>>>
>>>> Community-based business models: Insights from an emerging maker economy
>>>> http://www.mifav.uniroma2.it/inevent/events/idea2010/doc/30_5.pdf
>>>>
>>>> / Peter
>>>>
>>>> On 28 Jan 2017, at 14:26, Christian Villum <villum at autofunk.dk> wrote:
>>>>
>>>> Dear Irene,
>>>>
>>>> Thanks for responding. Your plans for Rizoma.uy sounds great, although
>>>> my Spanish is a little rusty. I would very much like to stay in the
>>>> loop of your work and hear about the outcomes and insights from the event
>>>> as well as from developing the planform, if possible?
>>>>
>>>> As for reading material: We are actually in the middle of building an
>>>> open source (hardware) business model 101 reading package (comprised of
>>>> articles, book-links, TED-talks, etc.) that aims to give its reader an
>>>> understanding of the concept, the relevant terms and a general overview).
>>>> As soon as it is ready we would love to share it here.
>>>>
>>>> In the meantime I would like to take this opportunity to ask everyone
>>>> on the list what open source hardware business development materials you
>>>> would suggest including in such a reading package?
>>>>
>>>> Thanks,
>>>>
>>>> Christian
>>>>
>>>> On 26 January 2017 at 20:06, Irene Maldini <irene.maldini at gmail.com>
>>>> wrote:
>>>>
>>>> Dear Christian,
>>>>
>>>> Very interesting post (REMODEL). I cannot participate in the event in
>>>> Toronto but I would be very interested in reading material about business
>>>> models in open design/hardware (from you or other members in this forum).
>>>>
>>>> We have recently launched an open design platform in Uruguay
>>>> (Rizoma.uy) and together with the local Creative Commons and the Design
>>>> cluster we are planning a specific event on the issue of business/economic
>>>> sustainability models for 2017. It would be nice to  know what is going on,
>>>> as I have not been following the topic for a couple of years already.
>>>>
>>>> Can you recommend any texts?
>>>>
>>>> Thank you
>>>>
>>>> Irene
>>>>
>>>>
>>>>
>>>> 2017-01-26 13:00 GMT+01:00 <opendesign-request at lists.okfn.org>:
>>>>
>>>> Send opendesign mailing list submissions to
>>>>         opendesign at lists.okfn.org
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>>         https://lists.okfn.org/mailman/listinfo/opendesign
>>>> or, via email, send a message with subject or body 'help' to
>>>>         opendesign-request at lists.okfn.org
>>>>
>>>> You can reach the person managing the list at
>>>>         opendesign-owner at lists.okfn.org
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of opendesign digest..."
>>>>
>>>>
>>>> Today's Topics:
>>>>
>>>>    1. Open hardware business model session(s) @ CC Global Summit?
>>>>       (Christian Villum)
>>>>
>>>>
>>>> ----------------------------------------------------------------------
>>>>
>>>> Message: 1
>>>> Date: Thu, 26 Jan 2017 06:25:15 +0100
>>>> From: Christian Villum <villum at autofunk.dk>
>>>> To: Open Design Definition - mailing list <opendesign at lists.okfn.org>
>>>> Subject: [Open Design + Hardware] Open hardware business model
>>>>         session(s) @    CC Global Summit?
>>>> Message-ID:
>>>>         <CAPg7MTg4Hy3dr9ASGKnB1fZDJZd-ttfRuWzcRHa3PFd=zRdZvQ at mail.gm
>>>> ail.com>
>>>> Content-Type: text/plain; charset="utf-8"
>>>>
>>>> Anyone going to CC Global Summit in Toronto in April who's up for
>>>> submitting one or more session proposals on open source hardware
>>>> business
>>>> models? I have a few ideas rooted in, among other things, my work on the
>>>> REMODEL program: http://danskdesigncenter.dk/en/remodel. Happy to
>>>> elaborate
>>>> if anyone's interested as well as discuss ideas for a joint session
>>>> proposal.
>>>>
>>>> Call for submissions: https://summit.creativecommons.org/
>>>>
>>>> Cheers,
>>>>
>>>> Christian Villum
>>>>
>>>> https://www.linkedin.com/in/christianvillum
>>>> -------------- next part --------------
>>>> An HTML attachment was scrubbed...
>>>> URL: <http://lists.okfn.org/pipermail/opendesign/attachments/2017
>>>> 0126/08ed101d/attachment-0001.html>
>>>>
>>>> ------------------------------
>>>>
>>>> Subject: Digest Footer
>>>>
>>>> _______________________________________________
>>>> opendesign mailing list
>>>> opendesign at lists.okfn.org
>>>> https://lists.okfn.org/mailman/listinfo/opendesign
>>>> Unsubscribe: https://lists.okfn.org/mailman/options/opendesign
>>>>
>>>>
>>>> ------------------------------
>>>>
>>>> End of opendesign Digest, Vol 50, Issue 4
>>>> *****************************************
>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> *Irene Maldini*
>>>> +31 0650451478 <+31%206%2050451478>
>>>>
>>>> _______________________________________________
>>>> opendesign mailing list
>>>> opendesign at lists.okfn.org
>>>> https://lists.okfn.org/mailman/listinfo/opendesign
>>>> Unsubscribe: https://lists.okfn.org/mailman/options/opendesign
>>>>
>>>>
>>>> _______________________________________________
>>>> opendesign mailing list
>>>> opendesign at lists.okfn.org
>>>> https://lists.okfn.org/mailman/listinfo/opendesign
>>>> Unsubscribe: https://lists.okfn.org/mailman/options/opendesign
>>>>
>>>>
>>>>
>>> _______________________________________________
>>> opendesign mailing list
>>> opendesign at lists.okfn.org
>>> https://lists.okfn.org/mailman/listinfo/opendesign
>>> Unsubscribe: https://lists.okfn.org/mailman/options/opendesign
>>>
>>>
>>
>>
>> --
>> Greg Austic
>>
>> 560 Little Lake dr Unit 10
>> Ann Arbor MI 48103
>>
>> Work -www.photosynq.org
>>
>
>
> _______________________________________________
> opendesign mailing list
> opendesign at lists.okfn.org
> https://lists.okfn.org/mailman/listinfo/opendesign
> Unsubscribe: https://lists.okfn.org/mailman/options/opendesign
>
>

-- 
Dr Paul Smith
Research Fellow
Design Innovation
Glasgow School of Art
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.okfn.org/pipermail/opendesign/attachments/20170131/eea54ead/attachment-0002.html>