[ckan-dev] Standard production install on Ubuntu 10.10 gives problem

Fri Sep 16 09:37:40 UTC 2011

On 16 September 2011 08:43, Kimpe Marc <Marc.Kimpe at cronos.be> wrote:
> Hi All,
>
>
> On another instance with the same Ubuntu 10.10 it is working fine.

Marc,
Great to hear this. I'm still trying to reproduce your other problem
with the specific versions of the packages you have.

> Although that install wasn't so easy either -  basically I had to
> manually reinstall different versions of python modules until
> it worked.  The version used there are lower than the ones we use now
> and listed below.

If you can supply any more detail about this then that would be appreciated.

> So it would be nice if we could have a nice and clean install as
> described in the documentation.

For distributions other than Lucid, we suggest in the docs that you do
the source install.

David

>
> Kind Regards,
>
> Marc
>
>
>
> On 15 Sep 2011, at 13:30, Kimpe Marc wrote:
>
>> Hi all,
>>
>> installed pip and here is the pip freeze output below.
>>
>> I understand the email error but that shouldn't prevent the site from
>> responding
>>
>> It is the
>>>> Thu Sep 15 10:18:05 2011] [error] [client 192.168.0.102] Error -
>>>> <type
>>>> 'exceptions.AttributeError'>: 'module' object has no attribute
>>>> '_push_object'
>> that is bothering me probably.
>>
>>
>> Kind regards,
>>
>> Marc
>>
>>
>> root at dpl2-ckan:~# apt-get install python-pip
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> The following NEW packages will be installed:
>>   python-pip
>> 0 upgraded, 1 newly installed, 0 to remove and 345 not upgraded.
>> Need to get 68.7kB of archives.
>> After this operation, 385kB of additional disk space will be used.
>> Get:1 http://sj.archive.ubuntu.com/ubuntu/ maverick/universe python-
>> pip all 0.7.2-1 [68.7kB]
>> Fetched 68.7kB in 0s (434kB/s)
>> Selecting previously deselected package python-pip.
>> (Reading database ... 124959 files and directories currently
>> installed.)
>> Unpacking python-pip (from .../python-pip_0.7.2-1_all.deb) ...
>> Processing triggers for man-db ...
>> Setting up python-pip (0.7.2-1) ...
>> Processing triggers for python-support ...
>>
>>
>> root at dpl2-ckan:~# pip freeze
>> ApacheMiddleware==0.1.0
>> Babel==0.9.4
>> Beaker==1.5.4
>> BeautifulSoup==3.1.0.1
>> Brlapi==0.5.5
>> CouchDB==0.6
>> FormAlchemy==1.3.9
>> FormEncode==1.2.2
>> GnuPGInterface==0.3.2
>> Jinja2==2.5.2
>> Mako==0.3.4
>> MarkupSafe==0.9.2
>> PAM==0.4.2
>> PIL==1.1.7
>> Paste==1.7.4
>> PasteDeploy==1.3.3
>> PasteScript==1.7.3
>> Pygments==1.3.1
>> Pylons==0.10
>> Routes==1.12.3
>> SQLAlchemy==0.6.3
>> Sphinx==0.6.6
>> Tempita==0.4
>> Twisted-Core==10.1.0
>> Twisted-Names==10.1.0
>> Twisted-Web==10.1.0
>> WebError==0.10.2
>> WebHelpers==1.0
>> WebOb==0.9.8
>> WebTest==1.2.1
>> adium-theme-ubuntu==0.3
>> apt-xapian-index==0.39
>> apturl==0.4.1ubuntu7
>> argparse==1.1
>> autoneg==0.5
>> ckan==1.4.2a
>> ckan-deps==1.3.1
>> ckanext-std==0.1
>> command-not-found==0.1
>> configglue==0.9pre1
>> decorator==3.2.0
>> distribute==0.6.14
>> docutils==0.6
>> flup==0.5
>> gnome-app-install==0.4.7ubuntu2
>> httplib2==0.6.0
>> jockey==0.5.10
>> launchpadlib==1.6.1
>> lazr.restfulclient==0.9.20
>> lazr.uri==1.0.2
>> licenses==0.6
>> louis==2.0.0
>> lxml==2.2.6
>> nose==0.11.1
>> nvidia-common==0.0.0
>> oauth==1.0a
>> onboard==0.94.0
>> papyon==0.5.1
>> pexpect==2.3
>> protobuf==2.3.0
>> psycopg2==2.2.1
>> pyOpenSSL==0.10
>> pycrypto==2.0.1
>> pycups==1.9.51
>> pycurl==7.19.0
>> pyinotify==0.8.9
>> pyserial==2.3
>> pysmbc==1.0.8
>> python-apt==0.7.96.1ubuntu11
>> python-debian==0.1.16ubuntu1
>> python-ldap==2.3.11
>> python-openid==2.2.4
>> python-virtkey==0.60.0
>> pyutilib.component.core==4.1
>> pyxdg==0.19
>> rdflib==2.4.2
>> repoze.who==1.0.18
>> repoze.who-friendlyform==1.0b3
>> repoze.who-testutil==1.0rc1
>> repoze.who.plugins.ldap==1.0
>> repoze.who.plugins.openid==0.5
>> repoze.who.plugins.sa==1.0rc2
>> scgi==1.13
>> screen-resolution-extra==0.0.0
>> sessioninstaller==0.0.0
>> simplejson==2.1.1
>> speechd==0.3
>> speechd-config==0.0
>> system-service==0.1.6
>> ubuntu-sso-client==1.0.3
>> ubuntuone-storage-protocol==1.4.0
>> ufw==0.30.0-1ubuntu2
>> unattended-upgrades==0.1
>> usb-creator==0.2.23
>> vdm==0.9
>> wadllib==1.1.4
>> wsgiref==0.1.2
>> xkit==0.0.0
>> zope.interface==3.6.1
>>
>> On 15 Sep 2011, at 13:13, David Read wrote:
>>
>>> On 15 September 2011 10:33, Kimpe Marc <Marc.Kimpe at cronos.be> wrote:
>>>> Hi all,
>>>>
>>>> I'm trying a standard production install as described in
>>>> http://readthedocs.org/docs/ckan/en/ckan-1.4.3/install-from-package.html#run-package-installer
>>>> on Ubuntu 10.10.
>>>>
>>>> When I try the test:
>>>> http://localhost   or http://dpl-ckan or http://192.168.0.102
>>>> I get the following internal error in apache :
>>>>
>>>> [Thu Sep 15 10:18:05 2011] [error] [client 192.168.0.102] Error -
>>>> <type
>>>> 'exceptions.AttributeError'>: 'module' object has no attribute
>>>> '_push_object'
>> ....
>>>> <p>Additionally an error occurred while sending the
>>>> <weberror.reporter.EmailReporter object at 0x240479ec> report:
>>>
>>> As an aside, this error occurs due to bad or non-configured email
>>> settings in your CKAN config file, section '[DEFAULT]'
>>>
>>>> .
>>>> What is went/is  wrong ?
>>>
>>> I've not seen this one before, so I'll have a poke around. Can you do
>>> a 'pip freeze' to let us know what versions you have of the python
>>> packages please?
>>>
>>> David
>>>
>>>>
>>>>
>>>>
>>>> Kind Regards,
>>>> Marc
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> ckan-dev mailing list
>>>> ckan-dev at lists.okfn.org
>>>> http://lists.okfn.org/mailman/listinfo/ckan-dev
>>>>
>>>>
>>>
>>> _______________________________________________
>>> ckan-dev mailing list
>>> ckan-dev at lists.okfn.org
>>> http://lists.okfn.org/mailman/listinfo/ckan-dev
>>
>
>
> _______________________________________________
> ckan-dev mailing list
> ckan-dev at lists.okfn.org
> http://lists.okfn.org/mailman/listinfo/ckan-dev
>