[ckan-dev] Geo spatial Capabilities Adding WMS layer, WMTS
Naresh N
naresh919 at gmail.com
Fri Jul 24 08:07:05 UTC 2015
Deal Sol,
Thanks a lot for quick response.I have added the issue for WMS Layer.
For WMTS - I have used production inatllation of CKAN or pip install
ckanext-geoview. If I am again installing development installation - will
create any issues?
Thanks&Regards,
Naresh
On Fri, Jul 24, 2015 at 11:48 AM, <ckan-dev-request at lists.okfn.org> wrote:
> Send ckan-dev mailing list submissions to
> ckan-dev at lists.okfn.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.okfn.org/mailman/listinfo/ckan-dev
> or, via email, send a message with subject or body 'help' to
> ckan-dev-request at lists.okfn.org
>
> You can reach the person managing the list at
> ckan-dev-owner at lists.okfn.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of ckan-dev digest..."
>
>
> Today's Topics:
>
> 1. Re: CKAN -Geo spatial Capabilities Adding WMS layer, WMTS
> layer - (???)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 24 Jul 2015 14:17:47 +0800
> From: ???[Sol] <u103133.u103135 at gmail.com>
> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
> Subject: Re: [ckan-dev] CKAN -Geo spatial Capabilities Adding WMS
> layer, WMTS layer -
> Message-ID:
> <CAA_4TBZC=
> vZ6FdTiFuHvCLGMHx+-CiHPcm8P_-aSC1vgus5r6A at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Naresh:
>
> Hope the following reply helps you.
>
>
> Sol
>
> 2015-07-24 12:52 GMT+08:00 Naresh N <naresh919 at gmail.com>:
>
> > Dear Sol,
> >
> > Thanks a lot for response. I will follow your suggestions. Please see
> > the following information and suggest further
> >
> > 1. How to add single/one WMS Layer to CKAN - means
> >
> >
> > WMS URL: http://localhost:8080/geoserver/test/wms and layer
> > name:'test:INDIA_STATE_250K'
> >
> > *I want add above only one layer info and see in OpenLayers view of CKAN*
> >
> > if we give WMSGetCapability url of the server it is listing all the
> layers
> > of that server, here I want add/feed the information for single layer
> >
> > Is it possible to add only one WMS Layer at a time to CKAN
> >
>
> Unfortunately, it can't at this moment. You can submit an issue here:
> https://github.com/ckan/ckanext-geoview/issues.
>
>
> >
> >
> > 2 . Add WMTS Layers - showing the following error. I have installed
> CKAN
> > 2.3 on Ubuntu 12.04 64 bit machine
> >
> > in error log file ' *PluginNotFoundException: wmts_view*.'
> >
>
> How did you install the ckanext-geoview?
>
> If you install it by "pip install ckanext-geoview", the installed version
> will be 0.0.7 and not contain the wmts_view plugin. To use wmts_view, you
> should install by development Installation. See
> https://github.com/ckan/ckanext-geoview#development-installation for
> details.
>
>
> >
> > Thanks&Regards,
> > Naresh
> >
> >
> > On Thu, Jul 23, 2015 at 3:46 PM, <ckan-dev-request at lists.okfn.org>
> wrote:
> >
> >> Send ckan-dev mailing list submissions to
> >> ckan-dev at lists.okfn.org
> >>
> >> To subscribe or unsubscribe via the World Wide Web, visit
> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> or, via email, send a message with subject or body 'help' to
> >> ckan-dev-request at lists.okfn.org
> >>
> >> You can reach the person managing the list at
> >> ckan-dev-owner at lists.okfn.org
> >>
> >> When replying, please edit your Subject line so it is more specific
> >> than "Re: Contents of ckan-dev digest..."
> >>
> >>
> >> Today's Topics:
> >>
> >> 1. CKAN -Geo spatial Capabilities Adding WMS layer, KML file,
> >> WMTS layer, Base layer option (Naresh N)
> >> 2. Re: CKAN -Geo spatial Capabilities Adding WMS layer, KML
> >> file, WMTS layer, Base layer option (???)
> >> 3. Re: ckanext-harvest: "There are no new harvesting jobs"
> >> (Knud Hinnerk M?ller)
> >>
> >>
> >> ----------------------------------------------------------------------
> >>
> >> Message: 1
> >> Date: Thu, 23 Jul 2015 12:07:07 +0530
> >> From: Naresh N <naresh919 at gmail.com>
> >> To: ckan-dev at lists.okfn.org
> >> Subject: [ckan-dev] CKAN -Geo spatial Capabilities Adding WMS layer,
> >> KML file, WMTS layer, Base layer option
> >> Message-ID:
> >> <CAKAPXzOXK_sMsp_Z2oJO=_
> >> h+HRKh-qNzB+oG7CxULnzwWCAbrA at mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Dear All,
> >>
> >> Please kindly guide us for following things. Please let me know is it
> >> possible or not. I a
> >> Have posted this query 3 days before but I did not get response,
> >> please kindly guide us to explore more on ckan capabilities
> >>
> >> 1. How to add single/one WMS Layer to CKAN
> >>
> >> 2. How to add KML file to ckan. - able to add kml file by using Upload
> >> Link option, but when I am adding by using upload file option and
> loading
> >> local kml file it is showing the following message in error log file '
> >>
> >> Error - <type 'exceptions.UnboundLocalError'>: local variable
> >> 'proxy_service_url' referenced before assignment'
> >>
> >>
> >> 3. How to add Shapefile to CKAN and visualize as WMS/WFS layer
> >>
> >> 4. How to Add WMTS Layers - I have added wmts_view in ckan.plugins and
> >> wmts_view in ckan.views.default_views in config file. But when iam
> >> opening
> >> the application with localhost it is showing 500 internal server error.
> >> And in error log file ' PluginNotFoundException: wmts_view.'
> >> 5. How to add our own based layer in Open Layers client of CKAN
> >>
> >> Thanks&Regards,
> >> Naresh
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >>
> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/d360b2b7/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 2
> >> Date: Thu, 23 Jul 2015 17:48:50 +0800
> >> From: ???[Sol] <u103133.u103135 at gmail.com>
> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
> >> Subject: Re: [ckan-dev] CKAN -Geo spatial Capabilities Adding WMS
> >> layer, KML file, WMTS layer, Base layer option
> >> Message-ID:
> >> <CAA_4TBazUcLCfYgwxfS9Ay98Vo+=
> >> XzPC1QarErt27nxqZry9Xw at mail.gmail.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Hi Naresh:
> >>
> >> The reply as below.
> >>
> >>
> >> Cheers,
> >>
> >> Sol
> >>
> >> 2015-07-23 14:37 GMT+08:00 Naresh N <naresh919 at gmail.com>:
> >>
> >> > Dear All,
> >> >
> >> > Please kindly guide us for following things. Please let me know is it
> >> possible or not. I a
> >> > Have posted this query 3 days before but I did not get response,
> please
> >> kindly guide us to explore more on ckan capabilities
> >> >
> >> > 1. How to add single/one WMS Layer to CKAN
> >> >
> >> > Not very clear what your problem is. Did you encounter any problems
> when
> >> adding wms layers?
> >>
> >> > 2. How to add KML file to ckan. - able to add kml file by using
> Upload
> >> > Link option, but when I am adding by using upload file option and
> >> loading
> >> > local kml file it is showing the following message in error log file
> '
> >> >
> >> > Error - <type 'exceptions.UnboundLocalError'>: local variable
> >> > 'proxy_service_url' referenced before assignment'
> >> >
> >> > It's a known issue and has been fixed in the master branch
> >> <
> >>
> https://github.com/ckan/ckanext-geoview/commit/de78049aeea5ad6706600d48482dc6dff72de61d
> >> >.
> >> Details: https://github.com/ckan/ckanext-geoview/issues/8.
> >>
> >>
> >> > 3. How to add Shapefile to CKAN and visualize as WMS/WFS layer
> >> >
> >> > So far as I know, ckanext-geoview doesn't support visualize
> shapefiles.
> >>
> >> 4. How to Add WMTS Layers - I have added wmts_view in ckan.plugins and
> >> > wmts_view in ckan.views.default_views in config file. But when iam
> >> opening
> >> > the application with localhost it is showing 500 internal server
> error.
> >> > And in error log file ' PluginNotFoundException: wmts_view.'
> >> >
> >> > Which version of CKAN and branch of ckanext-geoview are you using? If
> >> you
> >> are on CKAN < 2.3 you should add 'wmts_preview' rather than 'wmts_view'.
> >> And, currently wmts preview is only available on the master branch of
> >> ckanext-geoview.
> >>
> >> > 5. How to add our own based layer in Open Layers client of CKAN
> >> >
> >> > You can reference this:
> >>
> http://docs.ckan.org/projects/ckanext-spatial/en/latest/map-widgets.html.
> >>
> >> > Thanks&Regards,
> >> > Naresh
> >> >
> >> >
> >> > _______________________________________________
> >> > ckan-dev mailing list
> >> > ckan-dev at lists.okfn.org
> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >> >
> >> >
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >>
> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/ad839d91/attachment-0001.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Message: 3
> >> Date: Thu, 23 Jul 2015 12:16:43 +0200
> >> From: Knud Hinnerk M?ller <knud at datalysator.com>
> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
> >> Subject: Re: [ckan-dev] ckanext-harvest: "There are no new harvesting
> >> jobs"
> >> Message-ID: <12293F25-7DFA-49E2-9AF0-15BAB8E6CC29 at datalysator.com>
> >> Content-Type: text/plain; charset="utf-8"
> >>
> >> Thanks all for the explanations and the fix!
> >>
> >> Cheers,
> >> Knud
> >>
> >> > On 21 Jul 2015, at 12:20, Adri? Mercader <adria.mercader at okfn.org>
> >> wrote:
> >> >
> >> > Hi,
> >> >
> >> > I've merged Stefan's patch to avoid the exception.
> >> >
> >> > As a general rule, if there is something really ugly happening in CKAN
> >> > it's probably because it's really old (this code was written on April
> >> > 2011) and we somehow have got used to its ugliness. Any PRs like this
> >> > to make it prettier are very welcome!
> >> >
> >> > Cheers,
> >> >
> >> > Adri?
> >> >
> >> > On 20 July 2015 at 17:25, Stefan Oderbolz <stefan.oderbolz at liip.ch>
> >> wrote:
> >> >> I created a ticket on the ckanext-harvest repo
> >> >> (https://github.com/ckan/ckanext-harvest/issues/145) and will
> quickly
> >> add a
> >> >> PR to fix this ugly situation.
> >> >>
> >> >> On Mon, Jul 20, 2015 at 6:03 PM, Denis Zgonjanin <
> >> deniszgonjanin at gmail.com>
> >> >> wrote:
> >> >>>
> >> >>> Yes, I'm not sure whether there is a reason that needs to be there.
> >> >>> Perhaps someone more familiar with harvester could weigh in.
> >> >>>
> >> >>> But it would be better if it was just a message instead of a stack
> >> trace.
> >> >>> For new users especially, where seeing an error will usually give
> you
> >> the
> >> >>> impression that you didn't set something up properly.
> >> >>>
> >> >>> On Mon, Jul 20, 2015 at 11:49 AM, Stefan Oderbolz
> >> >>> <stefan.oderbolz at liip.ch> wrote:
> >> >>>>
> >> >>>> This is a good point, I'm already used to see this exception, it no
> >> >>>> longer bothers me. But it might be worth catching this exception
> and
> >> simply
> >> >>>> return a nice message indicating what's going on.
> >> >>>> Or is there a good reason for this behavior?
> >> >>>>
> >> >>>> - Stefan
> >> >>>>
> >> >>>> On Mon, Jul 20, 2015 at 5:28 PM, Denis Zgonjanin
> >> >>>> <deniszgonjanin at gmail.com> wrote:
> >> >>>>>
> >> >>>>> Hi Knud,
> >> >>>>>
> >> >>>>> This is normal behavior (although one could make an argument that
> >> in the
> >> >>>>> case of normal behavior software shouldn't throw an error).
> >> >>>>>
> >> >>>>> Jobs will run on a harvesting schedule, which you define when you
> >> create
> >> >>>>> the harvester in the web UI. For example, you create a daily
> >> harvester and
> >> >>>>> do 'harvester run'. The job runs, and harvested will compute when
> >> the next
> >> >>>>> job is due to be ran (24 hours from now). If you do `harvester
> run`
> >> before
> >> >>>>> then, you will get the expected error above.
> >> >>>>>
> >> >>>>> - Denis
> >> >>>>>
> >> >>>>> On Mon, Jul 20, 2015 at 11:23 AM, Knud Hinnerk M?ller
> >> >>>>> <knud at datalysator.com> wrote:
> >> >>>>>>
> >> >>>>>> Hi,
> >> >>>>>>
> >> >>>>>> I have a problem setting up ckanext-harvest for production. I?m
> >> >>>>>> following the steps explained in
> >> >>>>>>
> >>
> https://github.com/ckan/ckanext-harvest/blob/master/README.rst#setting-up-the-harvesters-on-a-production-server
> >> ,
> >> >>>>>> which works great at first. However, after the first time the
> >> harvester is
> >> >>>>>> run, I get an error message saying "Exception: There are no new
> >> harvesting
> >> >>>>>> jobs? each time the harvester is run again via cron. It seems I
> >> have to
> >> >>>>>> first create a new harvesting job via command line or Web UI. Is
> >> this
> >> >>>>>> intended behaviour? Or am I missing something? Could someone
> point
> >> me in the
> >> >>>>>> right direction?
> >> >>>>>>
> >> >>>>>> ---------
> >> >>>>>> 2015-07-20 17:00:03,530 DEBUG [ckan.config.environment] Loading
> the
> >> >>>>>> synchronous search plugin
> >> >>>>>> 2015-07-20 17:00:06,606 DEBUG [ckanext.harvest.model] Harvest
> >> tables
> >> >>>>>> defined in memory
> >> >>>>>> 2015-07-20 17:00:06,620 DEBUG [ckanext.harvest.model] Harvest
> >> tables
> >> >>>>>> already exist
> >> >>>>>> 2015-07-20 17:00:06,636 DEBUG [ckanext.berlin.plugin] get_actions
> >> >>>>>> 2015-07-20 17:00:06,667 DEBUG [ckanext.harvest.plugin] Using auth
> >> >>>>>> profile at ckanext.harvest.logic.auth
> >> >>>>>> 2015-07-20 17:00:06,699 INFO
> [ckanext.harvest.logic.action.update]
> >> >>>>>> Harvest job run: {}
> >> >>>>>> 2015-07-20 17:00:06,734 INFO
> >> [ckanext.harvest.logic.action.update] No
> >> >>>>>> new harvest jobs.
> >> >>>>>>
> >> >>>>>> Traceback (most recent call last):
> >> >>>>>> File ".../pyenv/bin/paster", line 9, in <module>
> >> >>>>>> load_entry_point('PasteScript==1.7.5', 'console_scripts',
> >> >>>>>> 'paster')()
> >> >>>>>> File
> >> >>>>>>
> >> ".../pyenv/local/lib/python2.7/site-packages/paste/script/command.py",
> line
> >> >>>>>> 104, in run
> >> >>>>>> invoke(command, command_name, options, args[1:])
> >> >>>>>> File
> >> >>>>>>
> >> ".../pyenv/local/lib/python2.7/site-packages/paste/script/command.py",
> line
> >> >>>>>> 143, in invoke
> >> >>>>>> exit_code = runner.run(args)
> >> >>>>>> File
> >> >>>>>>
> >> ".../pyenv/local/lib/python2.7/site-packages/paste/script/command.py",
> line
> >> >>>>>> 238, in run
> >> >>>>>> result = self.command()
> >> >>>>>> File
> >> >>>>>>
> >> ".../pyenv/src/ckanext-harvest/ckanext/harvest/commands/harvester.py",
> line
> >> >>>>>> 108, in command
> >> >>>>>> self.run_harvester()
> >> >>>>>> File
> >> >>>>>>
> >> ".../pyenv/src/ckanext-harvest/ckanext/harvest/commands/harvester.py",
> line
> >> >>>>>> 243, in run_harvester
> >> >>>>>> jobs = get_action('harvest_jobs_run')(context,{})
> >> >>>>>> File
> >> >>>>>>
> >> ".../pyenv/src/ckanext-harvest/ckanext/harvest/logic/action/update.py",
> line
> >> >>>>>> 145, in harvest_jobs_run
> >> >>>>>> raise Exception('There are no new harvesting jobs')
> >> >>>>>> Exception: There are no new harvesting jobs
> >> >>>>>> ------------
> >> >>>>>>
> >> >>>>>> I should add that I?m running an old version of the
> ckanext-harvest
> >> >>>>>> (@0609262731) and an old version of CKAN (1.8.2). I don?t think
> >> that?s the
> >> >>>>>> reason, though.
> >> >>>>>>
> >> >>>>>> Cheers,
> >> >>>>>> Knud
> >> >>>>>>
> >> >>>>>> --
> >> >>>>>> Dr. Knud Hinnerk M?ller
> >> >>>>>> Datalysator - Web Data Solutions and Training
> >> >>>>>> knud at datalysator.com
> >> >>>>>> +49 151 46 44 83 25
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>>
> >> >>>>>> _______________________________________________
> >> >>>>>> ckan-dev mailing list
> >> >>>>>> ckan-dev at lists.okfn.org
> >> >>>>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> >>>>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >> >>>>>>
> >> >>>>>
> >> >>>>>
> >> >>>>> _______________________________________________
> >> >>>>> ckan-dev mailing list
> >> >>>>> ckan-dev at lists.okfn.org
> >> >>>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> >>>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >> >>>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>> --
> >> >>>> Liip AG // Limmatstrasse 183 // CH-8005 Z?rich
> >> >>>> Tel +41 43 500 39 80 // GnuPG 0x7B588C67 // www.liip.ch
> >> >>>>
> >> >>>> _______________________________________________
> >> >>>> ckan-dev mailing list
> >> >>>> ckan-dev at lists.okfn.org
> >> >>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> >>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >> >>>>
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> ckan-dev mailing list
> >> >>> ckan-dev at lists.okfn.org
> >> >>> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> >>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >> >>>
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Liip AG // Limmatstrasse 183 // CH-8005 Z?rich
> >> >> Tel +41 43 500 39 80 // GnuPG 0x7B588C67 // www.liip.ch
> >> >>
> >> >> _______________________________________________
> >> >> ckan-dev mailing list
> >> >> ckan-dev at lists.okfn.org
> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >> >>
> >> > _______________________________________________
> >> > ckan-dev mailing list
> >> > ckan-dev at lists.okfn.org
> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >>
> >>
> >> --
> >> Dr. Knud Hinnerk M?ller
> >> Datalysator - Web Data Solutions and Training
> >> knud at datalysator.com
> >> +49 151 46 44 83 25
> >>
> >>
> >>
> >>
> >> -------------- next part --------------
> >> An HTML attachment was scrubbed...
> >> URL: <
> >>
> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/27a8ded8/attachment.html
> >> >
> >>
> >> ------------------------------
> >>
> >> Subject: Digest Footer
> >>
> >> _______________________________________________
> >> ckan-dev mailing list
> >> ckan-dev at lists.okfn.org
> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >>
> >>
> >> ------------------------------
> >>
> >> End of ckan-dev Digest, Vol 57, Issue 37
> >> ****************************************
> >>
> >
> >
> > _______________________________________________
> > ckan-dev mailing list
> > ckan-dev at lists.okfn.org
> > https://lists.okfn.org/mailman/listinfo/ckan-dev
> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150724/2c9d6c1d/attachment.html
> >
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ckan-dev mailing list
> ckan-dev at lists.okfn.org
> https://lists.okfn.org/mailman/listinfo/ckan-dev
> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>
>
> ------------------------------
>
> End of ckan-dev Digest, Vol 57, Issue 41
> ****************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.okfn.org/pipermail/ckan-dev/attachments/20150724/172130bd/attachment-0002.html>
More information about the ckan-dev
mailing list