[ckan-dev] Geo spatial Capabilities Adding WMS layer, WMTS
李承錱[Sol]
u103133.u103135 at gmail.com
Fri Jul 24 08:14:39 UTC 2015
Hi Naresh:
It should be okay if you install it again directly. Or you can remove
current version by "pip uninstall ckanext-geoview".
Cheers,
Sol
2015-07-24 16:07 GMT+08:00 Naresh N <naresh919 at gmail.com>:
> Deal Sol,
>
> Thanks a lot for quick response.I have added the issue for WMS Layer.
> For WMTS - I have used production inatllation of CKAN or pip install
> ckanext-geoview. If I am again installing development installation - will
> create any issues?
>
> Thanks&Regards,
> Naresh
>
> On Fri, Jul 24, 2015 at 11:48 AM, <ckan-dev-request at lists.okfn.org> wrote:
>
>> Send ckan-dev mailing list submissions to
>> ckan-dev at lists.okfn.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> or, via email, send a message with subject or body 'help' to
>> ckan-dev-request at lists.okfn.org
>>
>> You can reach the person managing the list at
>> ckan-dev-owner at lists.okfn.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of ckan-dev digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: CKAN -Geo spatial Capabilities Adding WMS layer, WMTS
>> layer - (???)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Fri, 24 Jul 2015 14:17:47 +0800
>> From: ???[Sol] <u103133.u103135 at gmail.com>
>> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> Subject: Re: [ckan-dev] CKAN -Geo spatial Capabilities Adding WMS
>> layer, WMTS layer -
>> Message-ID:
>> <CAA_4TBZC=
>> vZ6FdTiFuHvCLGMHx+-CiHPcm8P_-aSC1vgus5r6A at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Naresh:
>>
>> Hope the following reply helps you.
>>
>>
>> Sol
>>
>> 2015-07-24 12:52 GMT+08:00 Naresh N <naresh919 at gmail.com>:
>>
>> > Dear Sol,
>> >
>> > Thanks a lot for response. I will follow your suggestions. Please see
>> > the following information and suggest further
>> >
>> > 1. How to add single/one WMS Layer to CKAN - means
>> >
>> >
>> > WMS URL: http://localhost:8080/geoserver/test/wms and layer
>> > name:'test:INDIA_STATE_250K'
>> >
>> > *I want add above only one layer info and see in OpenLayers view of
>> CKAN*
>> >
>> > if we give WMSGetCapability url of the server it is listing all the
>> layers
>> > of that server, here I want add/feed the information for single layer
>> >
>> > Is it possible to add only one WMS Layer at a time to CKAN
>> >
>>
>> Unfortunately, it can't at this moment. You can submit an issue here:
>> https://github.com/ckan/ckanext-geoview/issues.
>>
>>
>> >
>> >
>> > 2 . Add WMTS Layers - showing the following error. I have installed
>> CKAN
>> > 2.3 on Ubuntu 12.04 64 bit machine
>> >
>> > in error log file ' *PluginNotFoundException: wmts_view*.'
>> >
>>
>> How did you install the ckanext-geoview?
>>
>> If you install it by "pip install ckanext-geoview", the installed version
>> will be 0.0.7 and not contain the wmts_view plugin. To use wmts_view, you
>> should install by development Installation. See
>> https://github.com/ckan/ckanext-geoview#development-installation for
>> details.
>>
>>
>> >
>> > Thanks&Regards,
>> > Naresh
>> >
>> >
>> > On Thu, Jul 23, 2015 at 3:46 PM, <ckan-dev-request at lists.okfn.org>
>> wrote:
>> >
>> >> Send ckan-dev mailing list submissions to
>> >> ckan-dev at lists.okfn.org
>> >>
>> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> or, via email, send a message with subject or body 'help' to
>> >> ckan-dev-request at lists.okfn.org
>> >>
>> >> You can reach the person managing the list at
>> >> ckan-dev-owner at lists.okfn.org
>> >>
>> >> When replying, please edit your Subject line so it is more specific
>> >> than "Re: Contents of ckan-dev digest..."
>> >>
>> >>
>> >> Today's Topics:
>> >>
>> >> 1. CKAN -Geo spatial Capabilities Adding WMS layer, KML file,
>> >> WMTS layer, Base layer option (Naresh N)
>> >> 2. Re: CKAN -Geo spatial Capabilities Adding WMS layer, KML
>> >> file, WMTS layer, Base layer option (???)
>> >> 3. Re: ckanext-harvest: "There are no new harvesting jobs"
>> >> (Knud Hinnerk M?ller)
>> >>
>> >>
>> >> ----------------------------------------------------------------------
>> >>
>> >> Message: 1
>> >> Date: Thu, 23 Jul 2015 12:07:07 +0530
>> >> From: Naresh N <naresh919 at gmail.com>
>> >> To: ckan-dev at lists.okfn.org
>> >> Subject: [ckan-dev] CKAN -Geo spatial Capabilities Adding WMS layer,
>> >> KML file, WMTS layer, Base layer option
>> >> Message-ID:
>> >> <CAKAPXzOXK_sMsp_Z2oJO=_
>> >> h+HRKh-qNzB+oG7CxULnzwWCAbrA at mail.gmail.com>
>> >> Content-Type: text/plain; charset="utf-8"
>> >>
>> >> Dear All,
>> >>
>> >> Please kindly guide us for following things. Please let me know is it
>> >> possible or not. I a
>> >> Have posted this query 3 days before but I did not get response,
>> >> please kindly guide us to explore more on ckan capabilities
>> >>
>> >> 1. How to add single/one WMS Layer to CKAN
>> >>
>> >> 2. How to add KML file to ckan. - able to add kml file by using
>> Upload
>> >> Link option, but when I am adding by using upload file option and
>> loading
>> >> local kml file it is showing the following message in error log file '
>> >>
>> >> Error - <type 'exceptions.UnboundLocalError'>: local variable
>> >> 'proxy_service_url' referenced before assignment'
>> >>
>> >>
>> >> 3. How to add Shapefile to CKAN and visualize as WMS/WFS layer
>> >>
>> >> 4. How to Add WMTS Layers - I have added wmts_view in ckan.plugins and
>> >> wmts_view in ckan.views.default_views in config file. But when iam
>> >> opening
>> >> the application with localhost it is showing 500 internal server error.
>> >> And in error log file ' PluginNotFoundException: wmts_view.'
>> >> 5. How to add our own based layer in Open Layers client of CKAN
>> >>
>> >> Thanks&Regards,
>> >> Naresh
>> >> -------------- next part --------------
>> >> An HTML attachment was scrubbed...
>> >> URL: <
>> >>
>> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/d360b2b7/attachment-0001.html
>> >> >
>> >>
>> >> ------------------------------
>> >>
>> >> Message: 2
>> >> Date: Thu, 23 Jul 2015 17:48:50 +0800
>> >> From: ???[Sol] <u103133.u103135 at gmail.com>
>> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> Subject: Re: [ckan-dev] CKAN -Geo spatial Capabilities Adding WMS
>> >> layer, KML file, WMTS layer, Base layer option
>> >> Message-ID:
>> >> <CAA_4TBazUcLCfYgwxfS9Ay98Vo+=
>> >> XzPC1QarErt27nxqZry9Xw at mail.gmail.com>
>> >> Content-Type: text/plain; charset="utf-8"
>> >>
>> >> Hi Naresh:
>> >>
>> >> The reply as below.
>> >>
>> >>
>> >> Cheers,
>> >>
>> >> Sol
>> >>
>> >> 2015-07-23 14:37 GMT+08:00 Naresh N <naresh919 at gmail.com>:
>> >>
>> >> > Dear All,
>> >> >
>> >> > Please kindly guide us for following things. Please let me know is it
>> >> possible or not. I a
>> >> > Have posted this query 3 days before but I did not get response,
>> please
>> >> kindly guide us to explore more on ckan capabilities
>> >> >
>> >> > 1. How to add single/one WMS Layer to CKAN
>> >> >
>> >> > Not very clear what your problem is. Did you encounter any problems
>> when
>> >> adding wms layers?
>> >>
>> >> > 2. How to add KML file to ckan. - able to add kml file by using
>> Upload
>> >> > Link option, but when I am adding by using upload file option and
>> >> loading
>> >> > local kml file it is showing the following message in error log
>> file '
>> >> >
>> >> > Error - <type 'exceptions.UnboundLocalError'>: local variable
>> >> > 'proxy_service_url' referenced before assignment'
>> >> >
>> >> > It's a known issue and has been fixed in the master branch
>> >> <
>> >>
>> https://github.com/ckan/ckanext-geoview/commit/de78049aeea5ad6706600d48482dc6dff72de61d
>> >> >.
>> >> Details: https://github.com/ckan/ckanext-geoview/issues/8.
>> >>
>> >>
>> >> > 3. How to add Shapefile to CKAN and visualize as WMS/WFS layer
>> >> >
>> >> > So far as I know, ckanext-geoview doesn't support visualize
>> shapefiles.
>> >>
>> >> 4. How to Add WMTS Layers - I have added wmts_view in ckan.plugins and
>> >> > wmts_view in ckan.views.default_views in config file. But when iam
>> >> opening
>> >> > the application with localhost it is showing 500 internal server
>> error.
>> >> > And in error log file ' PluginNotFoundException: wmts_view.'
>> >> >
>> >> > Which version of CKAN and branch of ckanext-geoview are you using? If
>> >> you
>> >> are on CKAN < 2.3 you should add 'wmts_preview' rather than
>> 'wmts_view'.
>> >> And, currently wmts preview is only available on the master branch of
>> >> ckanext-geoview.
>> >>
>> >> > 5. How to add our own based layer in Open Layers client of CKAN
>> >> >
>> >> > You can reference this:
>> >>
>> http://docs.ckan.org/projects/ckanext-spatial/en/latest/map-widgets.html.
>> >>
>> >> > Thanks&Regards,
>> >> > Naresh
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > ckan-dev mailing list
>> >> > ckan-dev at lists.okfn.org
>> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >
>> >> >
>> >> -------------- next part --------------
>> >> An HTML attachment was scrubbed...
>> >> URL: <
>> >>
>> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/ad839d91/attachment-0001.html
>> >> >
>> >>
>> >> ------------------------------
>> >>
>> >> Message: 3
>> >> Date: Thu, 23 Jul 2015 12:16:43 +0200
>> >> From: Knud Hinnerk M?ller <knud at datalysator.com>
>> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> Subject: Re: [ckan-dev] ckanext-harvest: "There are no new harvesting
>> >> jobs"
>> >> Message-ID: <12293F25-7DFA-49E2-9AF0-15BAB8E6CC29 at datalysator.com>
>> >> Content-Type: text/plain; charset="utf-8"
>> >>
>> >> Thanks all for the explanations and the fix!
>> >>
>> >> Cheers,
>> >> Knud
>> >>
>> >> > On 21 Jul 2015, at 12:20, Adri? Mercader <adria.mercader at okfn.org>
>> >> wrote:
>> >> >
>> >> > Hi,
>> >> >
>> >> > I've merged Stefan's patch to avoid the exception.
>> >> >
>> >> > As a general rule, if there is something really ugly happening in
>> CKAN
>> >> > it's probably because it's really old (this code was written on April
>> >> > 2011) and we somehow have got used to its ugliness. Any PRs like this
>> >> > to make it prettier are very welcome!
>> >> >
>> >> > Cheers,
>> >> >
>> >> > Adri?
>> >> >
>> >> > On 20 July 2015 at 17:25, Stefan Oderbolz <stefan.oderbolz at liip.ch>
>> >> wrote:
>> >> >> I created a ticket on the ckanext-harvest repo
>> >> >> (https://github.com/ckan/ckanext-harvest/issues/145) and will
>> quickly
>> >> add a
>> >> >> PR to fix this ugly situation.
>> >> >>
>> >> >> On Mon, Jul 20, 2015 at 6:03 PM, Denis Zgonjanin <
>> >> deniszgonjanin at gmail.com>
>> >> >> wrote:
>> >> >>>
>> >> >>> Yes, I'm not sure whether there is a reason that needs to be there.
>> >> >>> Perhaps someone more familiar with harvester could weigh in.
>> >> >>>
>> >> >>> But it would be better if it was just a message instead of a stack
>> >> trace.
>> >> >>> For new users especially, where seeing an error will usually give
>> you
>> >> the
>> >> >>> impression that you didn't set something up properly.
>> >> >>>
>> >> >>> On Mon, Jul 20, 2015 at 11:49 AM, Stefan Oderbolz
>> >> >>> <stefan.oderbolz at liip.ch> wrote:
>> >> >>>>
>> >> >>>> This is a good point, I'm already used to see this exception, it
>> no
>> >> >>>> longer bothers me. But it might be worth catching this exception
>> and
>> >> simply
>> >> >>>> return a nice message indicating what's going on.
>> >> >>>> Or is there a good reason for this behavior?
>> >> >>>>
>> >> >>>> - Stefan
>> >> >>>>
>> >> >>>> On Mon, Jul 20, 2015 at 5:28 PM, Denis Zgonjanin
>> >> >>>> <deniszgonjanin at gmail.com> wrote:
>> >> >>>>>
>> >> >>>>> Hi Knud,
>> >> >>>>>
>> >> >>>>> This is normal behavior (although one could make an argument that
>> >> in the
>> >> >>>>> case of normal behavior software shouldn't throw an error).
>> >> >>>>>
>> >> >>>>> Jobs will run on a harvesting schedule, which you define when you
>> >> create
>> >> >>>>> the harvester in the web UI. For example, you create a daily
>> >> harvester and
>> >> >>>>> do 'harvester run'. The job runs, and harvested will compute when
>> >> the next
>> >> >>>>> job is due to be ran (24 hours from now). If you do `harvester
>> run`
>> >> before
>> >> >>>>> then, you will get the expected error above.
>> >> >>>>>
>> >> >>>>> - Denis
>> >> >>>>>
>> >> >>>>> On Mon, Jul 20, 2015 at 11:23 AM, Knud Hinnerk M?ller
>> >> >>>>> <knud at datalysator.com> wrote:
>> >> >>>>>>
>> >> >>>>>> Hi,
>> >> >>>>>>
>> >> >>>>>> I have a problem setting up ckanext-harvest for production. I?m
>> >> >>>>>> following the steps explained in
>> >> >>>>>>
>> >>
>> https://github.com/ckan/ckanext-harvest/blob/master/README.rst#setting-up-the-harvesters-on-a-production-server
>> >> ,
>> >> >>>>>> which works great at first. However, after the first time the
>> >> harvester is
>> >> >>>>>> run, I get an error message saying "Exception: There are no new
>> >> harvesting
>> >> >>>>>> jobs? each time the harvester is run again via cron. It seems I
>> >> have to
>> >> >>>>>> first create a new harvesting job via command line or Web UI. Is
>> >> this
>> >> >>>>>> intended behaviour? Or am I missing something? Could someone
>> point
>> >> me in the
>> >> >>>>>> right direction?
>> >> >>>>>>
>> >> >>>>>> ---------
>> >> >>>>>> 2015-07-20 17:00:03,530 DEBUG [ckan.config.environment] Loading
>> the
>> >> >>>>>> synchronous search plugin
>> >> >>>>>> 2015-07-20 17:00:06,606 DEBUG [ckanext.harvest.model] Harvest
>> >> tables
>> >> >>>>>> defined in memory
>> >> >>>>>> 2015-07-20 17:00:06,620 DEBUG [ckanext.harvest.model] Harvest
>> >> tables
>> >> >>>>>> already exist
>> >> >>>>>> 2015-07-20 17:00:06,636 DEBUG [ckanext.berlin.plugin]
>> get_actions
>> >> >>>>>> 2015-07-20 17:00:06,667 DEBUG [ckanext.harvest.plugin] Using
>> auth
>> >> >>>>>> profile at ckanext.harvest.logic.auth
>> >> >>>>>> 2015-07-20 17:00:06,699 INFO
>> [ckanext.harvest.logic.action.update]
>> >> >>>>>> Harvest job run: {}
>> >> >>>>>> 2015-07-20 17:00:06,734 INFO
>> >> [ckanext.harvest.logic.action.update] No
>> >> >>>>>> new harvest jobs.
>> >> >>>>>>
>> >> >>>>>> Traceback (most recent call last):
>> >> >>>>>> File ".../pyenv/bin/paster", line 9, in <module>
>> >> >>>>>> load_entry_point('PasteScript==1.7.5', 'console_scripts',
>> >> >>>>>> 'paster')()
>> >> >>>>>> File
>> >> >>>>>>
>> >> ".../pyenv/local/lib/python2.7/site-packages/paste/script/command.py",
>> line
>> >> >>>>>> 104, in run
>> >> >>>>>> invoke(command, command_name, options, args[1:])
>> >> >>>>>> File
>> >> >>>>>>
>> >> ".../pyenv/local/lib/python2.7/site-packages/paste/script/command.py",
>> line
>> >> >>>>>> 143, in invoke
>> >> >>>>>> exit_code = runner.run(args)
>> >> >>>>>> File
>> >> >>>>>>
>> >> ".../pyenv/local/lib/python2.7/site-packages/paste/script/command.py",
>> line
>> >> >>>>>> 238, in run
>> >> >>>>>> result = self.command()
>> >> >>>>>> File
>> >> >>>>>>
>> >> ".../pyenv/src/ckanext-harvest/ckanext/harvest/commands/harvester.py",
>> line
>> >> >>>>>> 108, in command
>> >> >>>>>> self.run_harvester()
>> >> >>>>>> File
>> >> >>>>>>
>> >> ".../pyenv/src/ckanext-harvest/ckanext/harvest/commands/harvester.py",
>> line
>> >> >>>>>> 243, in run_harvester
>> >> >>>>>> jobs = get_action('harvest_jobs_run')(context,{})
>> >> >>>>>> File
>> >> >>>>>>
>> >>
>> ".../pyenv/src/ckanext-harvest/ckanext/harvest/logic/action/update.py", line
>> >> >>>>>> 145, in harvest_jobs_run
>> >> >>>>>> raise Exception('There are no new harvesting jobs')
>> >> >>>>>> Exception: There are no new harvesting jobs
>> >> >>>>>> ------------
>> >> >>>>>>
>> >> >>>>>> I should add that I?m running an old version of the
>> ckanext-harvest
>> >> >>>>>> (@0609262731) and an old version of CKAN (1.8.2). I don?t think
>> >> that?s the
>> >> >>>>>> reason, though.
>> >> >>>>>>
>> >> >>>>>> Cheers,
>> >> >>>>>> Knud
>> >> >>>>>>
>> >> >>>>>> --
>> >> >>>>>> Dr. Knud Hinnerk M?ller
>> >> >>>>>> Datalysator - Web Data Solutions and Training
>> >> >>>>>> knud at datalysator.com
>> >> >>>>>> +49 151 46 44 83 25
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>>
>> >> >>>>>> _______________________________________________
>> >> >>>>>> ckan-dev mailing list
>> >> >>>>>> ckan-dev at lists.okfn.org
>> >> >>>>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >>>>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>>>>>
>> >> >>>>>
>> >> >>>>>
>> >> >>>>> _______________________________________________
>> >> >>>>> ckan-dev mailing list
>> >> >>>>> ckan-dev at lists.okfn.org
>> >> >>>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >>>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>>>>
>> >> >>>>
>> >> >>>>
>> >> >>>>
>> >> >>>> --
>> >> >>>> Liip AG // Limmatstrasse 183 // CH-8005 Z?rich
>> >> >>>> Tel +41 43 500 39 80 // GnuPG 0x7B588C67 // www.liip.ch
>> >> >>>>
>> >> >>>> _______________________________________________
>> >> >>>> ckan-dev mailing list
>> >> >>>> ckan-dev at lists.okfn.org
>> >> >>>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >>>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>>>
>> >> >>>
>> >> >>>
>> >> >>> _______________________________________________
>> >> >>> ckan-dev mailing list
>> >> >>> ckan-dev at lists.okfn.org
>> >> >>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>>
>> >> >>
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Liip AG // Limmatstrasse 183 // CH-8005 Z?rich
>> >> >> Tel +41 43 500 39 80 // GnuPG 0x7B588C67 // www.liip.ch
>> >> >>
>> >> >> _______________________________________________
>> >> >> ckan-dev mailing list
>> >> >> ckan-dev at lists.okfn.org
>> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>
>> >> > _______________________________________________
>> >> > ckan-dev mailing list
>> >> > ckan-dev at lists.okfn.org
>> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >>
>> >>
>> >> --
>> >> Dr. Knud Hinnerk M?ller
>> >> Datalysator - Web Data Solutions and Training
>> >> knud at datalysator.com
>> >> +49 151 46 44 83 25
>> >>
>> >>
>> >>
>> >>
>> >> -------------- next part --------------
>> >> An HTML attachment was scrubbed...
>> >> URL: <
>> >>
>> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150723/27a8ded8/attachment.html
>> >> >
>> >>
>> >> ------------------------------
>> >>
>> >> Subject: Digest Footer
>> >>
>> >> _______________________________________________
>> >> ckan-dev mailing list
>> >> ckan-dev at lists.okfn.org
>> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> End of ckan-dev Digest, Vol 57, Issue 37
>> >> ****************************************
>> >>
>> >
>> >
>> > _______________________________________________
>> > ckan-dev mailing list
>> > ckan-dev at lists.okfn.org
>> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >
>> >
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150724/2c9d6c1d/attachment.html
>> >
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> ckan-dev mailing list
>> ckan-dev at lists.okfn.org
>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>>
>>
>> ------------------------------
>>
>> End of ckan-dev Digest, Vol 57, Issue 41
>> ****************************************
>>
>
>
> _______________________________________________
> ckan-dev mailing list
> ckan-dev at lists.okfn.org
> https://lists.okfn.org/mailman/listinfo/ckan-dev
> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.okfn.org/pipermail/ckan-dev/attachments/20150724/8a2a953a/attachment-0003.html>
More information about the ckan-dev
mailing list