[ckan-dev] Issues while enabling ckanext-spatial extension
David Read
david.read at hackneyworkshop.com
Tue Sep 8 17:12:31 UTC 2015
Naresh,
I'm afraid I'm too busy to help with anything off the standard install
such as the work-arounds you're looking at. I suggest you hire a
developer to look at this if you don't have time to look at the code
yourself.
Regards,
David
On 8 September 2015 at 10:45, Naresh N <naresh919 at gmail.com> wrote:
> Dear David,
>
> Thanks a lot for the suggestion and interest to resolve the issue. I will
> post in Shapely community forum. Kindly let me know any suggestions on
> following
> 1.Is it possible any work around to add map widget to search entries of CKAN
> based on extent.
> 2. Is it possible to remove installed all the dependency libraries of
> CKANext-spatial and once again start fresh installation of CKANext-spatial
> . My doubt is I might have done some mistake while following instructions
> because of it it might have throwing error. Please let me know any thing can
> do further to work it.
>
>
> Thanks&Regards,
> Naresh
>
> On Tue, Sep 8, 2015 at 12:47 PM, <ckan-dev-request at lists.okfn.org> wrote:
>>
>> Send ckan-dev mailing list submissions to
>> ckan-dev at lists.okfn.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> or, via email, send a message with subject or body 'help' to
>> ckan-dev-request at lists.okfn.org
>>
>> You can reach the person managing the list at
>> ckan-dev-owner at lists.okfn.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of ckan-dev digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: Issues while enabling ckanext-spatial extension (David Read)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Tue, 8 Sep 2015 08:16:56 +0100
>> From: David Read <david.read at hackneyworkshop.com>
>> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> Subject: Re: [ckan-dev] Issues while enabling ckanext-spatial
>> extension
>> Message-ID:
>>
>> <CAOY41VUaBMF9tq6g0FxJJvvPvQYX1LTLvpW2w+6cKoMke-umww at mail.gmail.com>
>> Content-Type: text/plain; charset=UTF-8
>>
>> Naresh,
>>
>> Sorry, this command works fine for me, whereas I did get that error
>> for other versions of Shapely. I don't think it is anything to do with
>> ckan, so can I encourage you to contact the Shapely community to find
>> out the issue, and report back here if you find out any solution, in
>> case other people get the problem too.
>>
>> David
>>
>> On 8 September 2015 at 05:44, Naresh N <naresh919 at gmail.com> wrote:
>> > Dear David,
>> > I have tried pip install 'Shapely==1.4.3'. Getting following error.
>> > Please
>> > suggest further.
>> >
>> > Downloading/unpacking Shapely==1.4.3
>> > Running setup.py egg_info for package Shapely
>> > Traceback (most recent call last):
>> > File "<string>", line 14, in <module>
>> > File "/usr/lib/ckan/default/build/Shapely/setup.py", line 38, in
>> > <module>
>> > from shapely.libgeos import geos_version_string, geos_version, \
>> > File "shapely/libgeos.py", line 83, in <module>
>> > clibs = get_geos_config('--clibs')
>> > File "shapely/libgeos.py", line 72, in get_geos_config
>> > raise ValueError(stderr.strip())
>> > ValueError: Usage: geos-config [OPTIONS]
>> > Options:
>> > [--prefix]
>> > [--version]
>> > [--libs]
>> > [--cflags]
>> > [--ldflags]
>> > [--includes]
>> > [--jtsport]
>> > Complete output from command python setup.py egg_info:
>> > Traceback (most recent call last):
>> >
>> > File "<string>", line 14, in <module>
>> >
>> > File "/usr/lib/ckan/default/build/Shapely/setup.py", line 38, in
>> > <module>
>> >
>> > from shapely.libgeos import geos_version_string, geos_version, \
>> >
>> > File "shapely/libgeos.py", line 83, in <module>
>> >
>> > clibs = get_geos_config('--clibs')
>> >
>> > File "shapely/libgeos.py", line 72, in get_geos_config
>> >
>> > raise ValueError(stderr.strip())
>> >
>> > ValueError: Usage: geos-config [OPTIONS]
>> >
>> > Options:
>> >
>> > [--prefix]
>> >
>> > [--version]
>> >
>> > [--libs]
>> >
>> > [--cflags]
>> >
>> > [--ldflags]
>> >
>> > [--includes]
>> >
>> > [--jtsport]
>> >
>> > ----------------------------------------
>> > Command python setup.py egg_info failed with error code 1 in
>> > /usr/lib/ckan/default/build/Shapely
>> > Storing complete log in /root/.pip/pip.log
>> >
>> >
>> >
>> >
>> > On Mon, Sep 7, 2015 at 8:28 PM, <ckan-dev-request at lists.okfn.org> wrote:
>> >>
>> >> Send ckan-dev mailing list submissions to
>> >> ckan-dev at lists.okfn.org
>> >>
>> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> or, via email, send a message with subject or body 'help' to
>> >> ckan-dev-request at lists.okfn.org
>> >>
>> >> You can reach the person managing the list at
>> >> ckan-dev-owner at lists.okfn.org
>> >>
>> >> When replying, please edit your Subject line so it is more specific
>> >> than "Re: Contents of ckan-dev digest..."
>> >>
>> >>
>> >> Today's Topics:
>> >>
>> >> 1. Re: Issues while enabling ckanext-spatial extension (David Read)
>> >>
>> >>
>> >> ----------------------------------------------------------------------
>> >>
>> >> Message: 1
>> >> Date: Mon, 7 Sep 2015 15:58:13 +0100
>> >> From: David Read <david.read at hackneyworkshop.com>
>> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> Subject: Re: [ckan-dev] Issues while enabling ckanext-spatial
>> >> extension
>> >> Message-ID:
>> >>
>> >> <CAOY41VUBC+rJyPdNU5e-Cj4fTKVUCZVyEZpByPTnbdapu1iMdg at mail.gmail.com>
>> >> Content-Type: text/plain; charset=UTF-8
>> >>
>> >> Navesh,
>> >>
>> >> Good.
>> >>
>> >> You didn't say what you did following reading that StackOverflow page.
>> >> I think the best suggestion is this:
>> >>
>> >> pip install 'Shapely==1.4.3'
>> >>
>> >> I think that should work. Can you try that?
>> >>
>> >> David
>> >>
>> >> On 7 September 2015 at 14:12, Naresh N <naresh919 at gmail.com> wrote:
>> >> > Hello David,
>> >> >
>> >> > Thanks for responding. Yes I installed CKAN on Ubuntu 12.04 64 bit
>> >> > machine.
>> >> >
>> >> > Thanks&Regards,
>> >> > Naresh
>> >> >
>> >> > On Mon, Sep 7, 2015 at 4:41 PM, <ckan-dev-request at lists.okfn.org>
>> >> > wrote:
>> >> >>
>> >> >> Send ckan-dev mailing list submissions to
>> >> >> ckan-dev at lists.okfn.org
>> >> >>
>> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> ckan-dev-request at lists.okfn.org
>> >> >>
>> >> >> You can reach the person managing the list at
>> >> >> ckan-dev-owner at lists.okfn.org
>> >> >>
>> >> >> When replying, please edit your Subject line so it is more specific
>> >> >> than "Re: Contents of ckan-dev digest..."
>> >> >>
>> >> >>
>> >> >> Today's Topics:
>> >> >>
>> >> >> 1. Re: Connecting Ckan to Oracle databases (Jordi Piqueras
>> >> >> Bautista)
>> >> >> 2. Re: Issues while enabling ckanext-spatial extension (David
>> >> >> Read)
>> >> >>
>> >> >>
>> >> >>
>> >> >> ----------------------------------------------------------------------
>> >> >>
>> >> >> Message: 1
>> >> >> Date: Mon, 7 Sep 2015 07:33:27 +0000
>> >> >> From: Jordi Piqueras Bautista <jpiqueras at absis.es>
>> >> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> >> Subject: Re: [ckan-dev] Connecting Ckan to Oracle databases
>> >> >> Message-ID:
>> >> >> <067CDC7D3EE4A646A36369A40A9487240141802B at espot.absis.com>
>> >> >> Content-Type: text/plain; charset="iso-8859-1"
>> >> >>
>> >> >> Youssef,
>> >> >>
>> >> >> As you know, I am searching a solution like you have explained.
>> >> >>
>> >> >> By the way, I was wondering if using the CKAN Geoserver extension
>> >> >> could
>> >> >> be
>> >> >> a solution for what I have to do. I mean, with Geoserver you can
>> >> >> publish
>> >> >> different schemas from a spatial database. Then, I guess that I
>> >> >> could
>> >> >> configure a CKAN harvester collecting the information of these
>> >> >> tables
>> >> >> and
>> >> >> adding at the same time some metadata description. In that moment I
>> >> >> could
>> >> >> get my purpose because I only need to inform which tables I have in
>> >> >> my
>> >> >> Oracle DB.
>> >> >>
>> >> >> It is only an idea but, could be helpful to our purpose?
>> >> >>
>> >> >> It would be much better to avoid installing Geoserver and its CKAN
>> >> >> extension. The best option would be to have another pure CKAN
>> >> >> extension
>> >> >> for
>> >> >> publish tables and views from databases. In my case, It also would
>> >> >> be
>> >> >> perfect having a webservice giving poll information and updates as
>> >> >> number of
>> >> >> records created/updated/deleted.
>> >> >>
>> >> >> Does anyone another suggestion?
>> >> >>
>> >> >> Thank you.
>> >> >>
>> >> >> -----Mensaje original-----
>> >> >> De: ckan-dev [mailto:ckan-dev-bounces at lists.okfn.org] En nombre de
>> >> >> Ian
>> >> >> Ward
>> >> >> Enviado el: mi?rcoles, 02 de septiembre de 2015 23:46
>> >> >> Para: CKAN Development Discussions
>> >> >> Asunto: Re: [ckan-dev] Connecting Ckan to Oracle databases
>> >> >>
>> >> >> Hello Youssef,
>> >> >>
>> >> >> I'm not aware of extensions that already do what you're asking, but
>> >> >> CKAN
>> >> >> will let you search any metadata you load.
>> >> >>
>> >> >> I have a few questions for you: Do you want to be able to search the
>> >> >> contents of larger documents or just descriptions? How many possible
>> >> >> results
>> >> >> would there be in total? How many different types of records are you
>> >> >> searching? Does your web service let you poll for updates (just
>> >> >> records
>> >> >> created/updated/deleted in a certain time)?
>> >> >>
>> >> >> Ian
>> >> >>
>> >> >> On Wed, Sep 2, 2015 at 2:38 PM, <Youssef.Kadri at statcan.gc.ca>
>> >> >> wrote:
>> >> >> >
>> >> >> >
>> >> >> > Hello CKANers,
>> >> >> >
>> >> >> > I want to develop an enterprise search solution with CKAN. Is CKAN
>> >> >> > able to connect to Oracle databases, crawl databases to be indexed
>> >> >> > and
>> >> >> > after that searched?
>> >> >> >
>> >> >> > I also have a Web service to access to a database, is it possible
>> >> >> > with
>> >> >> > CKAN to consume a Web service and search this database?
>> >> >> >
>> >> >> > If yes, which extensions or plug-ins are necessary for that?
>> >> >> >
>> >> >> > Any documentation is welcomed.
>> >> >> >
>> >> >> > Thank you.
>> >> >> >
>> >> >> > Youssef
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > ckan-dev mailing list
>> >> >> > ckan-dev at lists.okfn.org
>> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >
>> >> >> _______________________________________________
>> >> >> ckan-dev mailing list
>> >> >> ckan-dev at lists.okfn.org
>> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> Message: 2
>> >> >> Date: Mon, 7 Sep 2015 12:11:03 +0100
>> >> >> From: David Read <david.read at hackneyworkshop.com>
>> >> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> >> Subject: Re: [ckan-dev] Issues while enabling ckanext-spatial
>> >> >> extension
>> >> >> Message-ID:
>> >> >>
>> >> >> <CAOY41VVpiMKnjh42eW1Hv2CdPEYdWtwQ-UenrihB0qOHPbFwkw at mail.gmail.com>
>> >> >> Content-Type: text/plain; charset=UTF-8
>> >> >>
>> >> >> Naresh,
>> >> >> Are you using Ubuntu 12.04?
>> >> >> David
>> >> >>
>> >> >> On 7 September 2015 at 06:32, Naresh N <naresh919 at gmail.com> wrote:
>> >> >> > Dear All, Please help me to resolve following issue
>> >> >> >
>> >> >> > I am enabling ckanext-spatial extension in one more machine. I
>> >> >> > have
>> >> >> > followed instructions given in
>> >> >> > http://ckanext-spatial.readthedocs.org/en/latest/install.html
>> >> >> > except
>> >> >> > following instruction
>> >> >> >
>> >> >> > (pyenv) $ pip install -r pip-requirements.txt.
>> >> >> > Instead of above I have used
>> >> >> > (pyenv)$ pip install -r
>> >> >> > /usr/lib/ckan/default/src/ckanext-spatial/pip-requirements.txt
>> >> >> >
>> >> >> > It is shown following error message
>> >> >> >
>> >> >> > Downloading/unpacking Shapely>=1.2.13 (from -r
>> >> >> > /usr/lib/ckan/default/src/ckanext-spatial/pip-requirements.txt
>> >> >> > (line
>> >> >> > 3)) Running setup.py egg_info for package Shapely
>> >> >> > ERROR:/usr/lib/ckan/default/build/Shapely/setup.py:Path to
>> >> >> > geos-config
>> >> >> > is not set
>> >> >> > ERROR:/usr/lib/ckan/default/build/Shapely/setup.py:Cannot
>> >> >> > find geos-config to get headers and check version.
>> >> >> > ERROR:/usr/lib/ckan/default/build/Shapely/setup.py:If available,
>> >> >> > specify a path to geos-config with a GEOS_CONFIG environment
>> >> >> > variable
>> >> >> >
>> >> >> > After that I have also tried solution given in following link
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > http://stackoverflow.com/questions/25873463/libgeos-c-so-undefined-symbol-geosisclosed
>> >> >> >
>> >> >> > but it is also showing error.
>> >> >> >
>> >> >> > Downloading/unpacking Shapely>=1.3.3
>> >> >> > Running setup.py egg_info for package Shapely
>> >> >> > Traceback (most recent call last):
>> >> >> > File "<string>", line 14, in <module>
>> >> >> > File "/usr/lib/ckan/default/build/Shapely/setup.py", line
>> >> >> > 38,
>> >> >> > in
>> >> >> > <module>
>> >> >> > from shapely.libgeos import geos_version_string,
>> >> >> > geos_version, \
>> >> >> > File "shapely/libgeos.py", line 83, in <module>
>> >> >> > clibs = get_geos_config('--clibs')
>> >> >> > File "shapely/libgeos.py", line 72, in get_geos_config
>> >> >> > raise ValueError(stderr.strip())
>> >> >> > ValueError: Usage: geos-config [OPTIONS]
>> >> >> > Options:
>> >> >> > [--prefix]
>> >> >> > [--version]
>> >> >> > [--libs]
>> >> >> > [--cflags]
>> >> >> > [--ldflags]
>> >> >> > [--includes]
>> >> >> > [--jtsport]
>> >> >> > Complete output from command python setup.py egg_info:
>> >> >> > Traceback (most recent call last):
>> >> >> >
>> >> >> > File "<string>", line 14, in <module>
>> >> >> >
>> >> >> > File "/usr/lib/ckan/default/build/Shapely/setup.py", line 38, in
>> >> >> > <module>
>> >> >> >
>> >> >> > from shapely.libgeos import geos_version_string, geos_version,
>> >> >> > \
>> >> >> >
>> >> >> > File "shapely/libgeos.py", line 83, in <module>
>> >> >> >
>> >> >> > clibs = get_geos_config('--clibs')
>> >> >> >
>> >> >> > File "shapely/libgeos.py", line 72, in get_geos_config
>> >> >> >
>> >> >> > raise ValueError(stderr.strip())
>> >> >> >
>> >> >> > ValueError: Usage: geos-config [OPTIONS]
>> >> >> >
>> >> >> > Options:
>> >> >> >
>> >> >> > [--prefix]
>> >> >> >
>> >> >> > [--version]
>> >> >> >
>> >> >> > [--libs]
>> >> >> >
>> >> >> > [--cflags]
>> >> >> >
>> >> >> > [--ldflags]
>> >> >> >
>> >> >> > [--includes]
>> >> >> >
>> >> >> > [--jtsport]
>> >> >> >
>> >> >> > ----------------------------------------
>> >> >> > Command python setup.py egg_info failed with error code 1 in
>> >> >> > /usr/lib/ckan/default/build/Shapely
>> >> >> > Storing complete log in /root/.pip/pip.log
>> >> >> >
>> >> >> >
>> >> >> > Please kindly help me to resolve the issue
>> >> >> >
>> >> >> >
>> >> >> > Thanks&Regards,
>> >> >> > Naresh
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > On Fri, Sep 4, 2015 at 10:28 AM, <ckan-dev-request at lists.okfn.org>
>> >> >> > wrote:
>> >> >> >>
>> >> >> >> Send ckan-dev mailing list submissions to
>> >> >> >> ckan-dev at lists.okfn.org
>> >> >> >>
>> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> >> ckan-dev-request at lists.okfn.org
>> >> >> >>
>> >> >> >> You can reach the person managing the list at
>> >> >> >> ckan-dev-owner at lists.okfn.org
>> >> >> >>
>> >> >> >> When replying, please edit your Subject line so it is more
>> >> >> >> specific
>> >> >> >> than "Re: Contents of ckan-dev digest..."
>> >> >> >>
>> >> >> >>
>> >> >> >> Today's Topics:
>> >> >> >>
>> >> >> >> 1. Solr tagging (Oliver Standeven)
>> >> >> >> 2. Re: Solr tagging (Rae Knowler)
>> >> >> >> 3. Re: Batch upload (Denis Zgonjanin)
>> >> >> >> 4. Enabling File Upload - ckan_version: "2.4.0" (Natalia
>> >> >> >> Queiroz)
>> >> >> >> 5. issues while enabling ckanext-spatial extension (Naresh N)
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> ----------------------------------------------------------------------
>> >> >> >>
>> >> >> >> Message: 1
>> >> >> >> Date: Thu, 3 Sep 2015 10:42:23 +0100
>> >> >> >> From: Oliver Standeven <ols at pml.ac.uk>
>> >> >> >> To: <ckan-dev at lists.okfn.org>
>> >> >> >> Subject: [ckan-dev] Solr tagging
>> >> >> >> Message-ID: <55E815FF.4060001 at pml.ac.uk>
>> >> >> >> Content-Type: text/plain; charset="utf-8"
>> >> >> >>
>> >> >> >> Hi all,
>> >> >> >>
>> >> >> >> I have a little inquiry. I am a student working on placement at
>> >> >> >> PML.
>> >> >> >> I
>> >> >> >> have been developing some extensions for CKAN and am now ready to
>> >> >> >> put
>> >> >> >> the system into a production environment.
>> >> >> >>
>> >> >> >> There is just one thing that is bugging me and I wonder if
>> >> >> >> anybody
>> >> >> >> could
>> >> >> >> help answer this question.
>> >> >> >>
>> >> >> >> When I clear out CKAN (drop the database and re-initialise it
>> >> >> >> using
>> >> >> >> he
>> >> >> >> paster command), solr still seems to have some kind of record of
>> >> >> >> the
>> >> >> >> tags, as it displays them on the datasets page. It also says that
>> >> >> >> there
>> >> >> >> are some datasets when there has been nothing added.
>> >> >> >>
>> >> >> >> Could someone shed some light on this as I feel it will give me a
>> >> >> >> better
>> >> >> >> understanding of how solr works with CKAN.
>> >> >> >>
>> >> >> >> Thanks a lot,
>> >> >> >>
>> >> >> >> Oliver Standeven
>> >> >> >>
>> >> >> >>
>> >> >> >> Please visit our new website at www.pml.ac.uk and follow us on
>> >> >> >> Twitter
>> >> >> >> @PlymouthMarine
>> >> >> >>
>> >> >> >> Winner of the Environment & Conservation category, the Charity
>> >> >> >> Awards
>> >> >> >> 2014.
>> >> >> >>
>> >> >> >> Plymouth Marine Laboratory (PML) is a company limited by
>> >> >> >> guarantee
>> >> >> >> registered in England & Wales, company number 4178503. Registered
>> >> >> >> Charity
>> >> >> >> No. 1091222. Registered Office: Prospect Place, The Hoe, Plymouth
>> >> >> >> PL1
>> >> >> >> 3DH,
>> >> >> >> UK.
>> >> >> >>
>> >> >> >> This message is private and confidential. If you have received
>> >> >> >> this
>> >> >> >> message in error, please notify the sender and remove it from
>> >> >> >> your
>> >> >> >> system.
>> >> >> >> You are reminded that e-mail communications are not secure and
>> >> >> >> may
>> >> >> >> contain
>> >> >> >> viruses; PML accepts no liability for any loss or damage which
>> >> >> >> may
>> >> >> >> be
>> >> >> >> caused
>> >> >> >> by viruses.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> ------------------------------
>> >> >> >>
>> >> >> >> Message: 2
>> >> >> >> Date: Thu, 3 Sep 2015 15:28:56 +0200
>> >> >> >> From: Rae Knowler <rachel.knowler at liip.ch>
>> >> >> >> To: ckan-dev at lists.okfn.org
>> >> >> >> Subject: Re: [ckan-dev] Solr tagging
>> >> >> >> Message-ID: <55E84B18.9010501 at liip.ch>
>> >> >> >> Content-Type: text/plain; charset=windows-1252; format=flowed
>> >> >> >>
>> >> >> >> Hi Oliver,
>> >> >> >>
>> >> >> >> In this situation you need to rebuild the Solr index. There is a
>> >> >> >> paster
>> >> >> >> command for this:
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> http://docs.ckan.org/en/latest/maintaining/paster.html?#search-index-rebuild-search-index.
>> >> >> >>
>> >> >> >> Hope that helps,
>> >> >> >> Rae
>> >> >> >>
>> >> >> >> On 09/03/2015 11:42 AM, Oliver Standeven wrote:
>> >> >> >> > Hi all,
>> >> >> >> >
>> >> >> >> > I have a little inquiry. I am a student working on placement at
>> >> >> >> > PML.
>> >> >> >> > I
>> >> >> >> > have been developing some extensions for CKAN and am now ready
>> >> >> >> > to
>> >> >> >> > put
>> >> >> >> > the system into a production environment.
>> >> >> >> >
>> >> >> >> > There is just one thing that is bugging me and I wonder if
>> >> >> >> > anybody
>> >> >> >> > could
>> >> >> >> > help answer this question.
>> >> >> >> >
>> >> >> >> > When I clear out CKAN (drop the database and re-initialise it
>> >> >> >> > using
>> >> >> >> > he
>> >> >> >> > paster command), solr still seems to have some kind of record
>> >> >> >> > of
>> >> >> >> > the
>> >> >> >> > tags, as it displays them on the datasets page. It also says
>> >> >> >> > that
>> >> >> >> > there
>> >> >> >> > are some datasets when there has been nothing added.
>> >> >> >> >
>> >> >> >> > Could someone shed some light on this as I feel it will give me
>> >> >> >> > a
>> >> >> >> > better
>> >> >> >> > understanding of how solr works with CKAN.
>> >> >> >> >
>> >> >> >> > Thanks a lot,
>> >> >> >> >
>> >> >> >> > Oliver Standeven
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > Please visit our new website at www.pml.ac.uk and follow us on
>> >> >> >> > Twitter
>> >> >> >> > @PlymouthMarine
>> >> >> >> >
>> >> >> >> > Winner of the Environment & Conservation category, the Charity
>> >> >> >> > Awards
>> >> >> >> > 2014.
>> >> >> >> >
>> >> >> >> > Plymouth Marine Laboratory (PML) is a company limited by
>> >> >> >> > guarantee
>> >> >> >> > registered in England & Wales, company number 4178503.
>> >> >> >> > Registered
>> >> >> >> > Charity
>> >> >> >> > No. 1091222. Registered Office: Prospect Place, The Hoe,
>> >> >> >> > Plymouth
>> >> >> >> > PL1 3DH,
>> >> >> >> > UK.
>> >> >> >> >
>> >> >> >> > This message is private and confidential. If you have received
>> >> >> >> > this
>> >> >> >> > message in error, please notify the sender and remove it from
>> >> >> >> > your
>> >> >> >> > system.
>> >> >> >> > You are reminded that e-mail communications are not secure and
>> >> >> >> > may
>> >> >> >> > contain
>> >> >> >> > viruses; PML accepts no liability for any loss or damage which
>> >> >> >> > may
>> >> >> >> > be
>> >> >> >> > caused
>> >> >> >> > by viruses.
>> >> >> >> >
>> >> >> >> > _______________________________________________
>> >> >> >> > ckan-dev mailing list
>> >> >> >> > ckan-dev at lists.okfn.org
>> >> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> ------------------------------
>> >> >> >>
>> >> >> >> Message: 3
>> >> >> >> Date: Thu, 3 Sep 2015 10:23:44 -0400
>> >> >> >> From: Denis Zgonjanin <deniszgonjanin at gmail.com>
>> >> >> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> >> >> Subject: Re: [ckan-dev] Batch upload
>> >> >> >> Message-ID:
>> >> >> >>
>> >> >> >>
>> >> >> >> <CAGSzoiPK8dGaYuE8A8VkDLdjPT=HSABjzDPiMgsF8LstOTFPJQ at mail.gmail.com>
>> >> >> >> Content-Type: text/plain; charset="utf-8"
>> >> >> >>
>> >> >> >> There is a project we did a few months ago, to batch export all
>> >> >> >> CKAN
>> >> >> >> data
>> >> >> >> and metadata into the Data Packages
>> >> >> >> (http://dataprotocols.org/data-packages/) format.
>> >> >> >> The code we wrote is built into the ckanapi:
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> https://github.com/ckan/ckanapi#bulk-dataset-and-resource-export---datapackagejson-format
>> >> >> >>
>> >> >> >> Now what's left is the same functionality, the other way. A batch
>> >> >> >> import.
>> >> >> >>
>> >> >> >> If you have any appetite to take it on, it might be a good
>> >> >> >> addition
>> >> >> >> for
>> >> >> >> ckanapi as well.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> On Thu, Sep 3, 2015 at 12:44 AM, Aaron McGlinchy <
>> >> >> >> McGlinchyA at landcareresearch.co.nz> wrote:
>> >> >> >>
>> >> >> >> > Hi,
>> >> >> >> > Has anyone done any work on batch upload of data e.g. point
>> >> >> >> > to
>> >> >> >> > a
>> >> >> >> > folder
>> >> >> >> > containing numerous resources, enter dataset level metadata,
>> >> >> >> > point
>> >> >> >> > to
>> >> >> >> > the
>> >> >> >> > folder and load up all the files in the folder under that
>> >> >> >> > dataset.
>> >> >> >> > Could
>> >> >> >> > have a manifest file that contained a list of the file names
>> >> >> >> > and
>> >> >> >> > the
>> >> >> >> > description to be associated with that file when it was
>> >> >> >> > uploaded
>> >> >> >> > as a
>> >> >> >> > resource...
>> >> >> >> >
>> >> >> >> > Could consider zipping e.g. if the main folder contained
>> >> >> >> > subfolders
>> >> >> >> > which
>> >> >> >> > contained several files, maybe zip each folder.
>> >> >> >> >
>> >> >> >> > Not wedded to anything, just wondering what if any work been
>> >> >> >> > done
>> >> >> >> > around
>> >> >> >> > such things.
>> >> >> >> >
>> >> >> >> > Thanks
>> >> >> >> > Aaron
>> >> >> >> >
>> >> >> >> > ________________________________
>> >> >> >> >
>> >> >> >> > Please consider the environment before printing this email
>> >> >> >> > Warning: This electronic message together with any attachments
>> >> >> >> > is
>> >> >> >> > confidential. If you receive it in error: (i) you must not
>> >> >> >> > read,
>> >> >> >> > use,
>> >> >> >> > disclose, copy or retain it; (ii) please contact the sender
>> >> >> >> > immediately
>> >> >> >> > by
>> >> >> >> > reply email and then delete the emails.
>> >> >> >> > The views expressed in this email may not be those of Landcare
>> >> >> >> > Research
>> >> >> >> > New Zealand Limited. http://www.landcareresearch.co.nz
>> >> >> >> > _______________________________________________
>> >> >> >> > ckan-dev mailing list
>> >> >> >> > ckan-dev at lists.okfn.org
>> >> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >> >
>> >> >> >> -------------- next part --------------
>> >> >> >> An HTML attachment was scrubbed...
>> >> >> >> URL:
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> <http://lists.okfn.org/pipermail/ckan-dev/attachments/20150903/bee7f73c/attachment-0001.html>
>> >> >> >>
>> >> >> >> ------------------------------
>> >> >> >>
>> >> >> >> Message: 4
>> >> >> >> Date: Thu, 3 Sep 2015 15:48:50 -0300
>> >> >> >> From: Natalia Queiroz <queiroz.nati at gmail.com>
>> >> >> >> To: ckan-dev at lists.okfn.org
>> >> >> >> Subject: [ckan-dev] Enabling File Upload - ckan_version: "2.4.0"
>> >> >> >> Message-ID:
>> >> >> >>
>> >> >> >>
>> >> >> >> <CAAuYkdV7OVkvpry0GGA0cN3mRf_m8mLwpaiaUO=VKR3w4jzk8g at mail.gmail.com>
>> >> >> >> Content-Type: text/plain; charset="utf-8"
>> >> >> >>
>> >> >> >> Hello group,
>> >> >> >>
>> >> >> >> I'm trying to enable the file upload option and I followed the
>> >> >> >> instructions according to the documentation
>> >> >> >> http://docs.ckan.org/en/ckan-2.4.0/maintaining/filestore.html
>> >> >> >>
>> >> >> >> I'm using ckan_version: "2.4.0"
>> >> >> >>
>> >> >> >> Those were the steps:
>> >> >> >>
>> >> >> >> 1. Create the directory where CKAN will store uploaded files:
>> >> >> >> sudo mkdir -p /var/lib/ckan/default
>> >> >> >> 2. Add the following line to your CKAN config file
>> >> >> >> (/etc/ckan/default/development.ini), after the [app:main]line:
>> >> >> >> ckan.storage_path = /var/lib/ckan/default
>> >> >> >>
>> >> >> >> [app:main]
>> >> >> >> ckan.storage_path = /var/lib/ckan/default
>> >> >> >> use = egg:ckan
>> >> >> >> full_stack = true
>> >> >> >> cache_dir = /tmp/%(ckan.site_id)s/
>> >> >> >> beaker.session.key = ckan
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> 3.Set the permissions of your ckan.storage_path<directory
>> >> >> >> sudo chown www-data /var/lib/ckan/default
>> >> >> >> sudo chmod u+rwx /var/lib/ckan/default
>> >> >> >>
>> >> >> >> 4. Restart Apache
>> >> >> >>
>> >> >> >> sudo service apache2 reload
>> >> >> >>
>> >> >> >>
>> >> >> >> I still don't see the file upload option when trying to create a
>> >> >> >> dataset. Is there somewhere else I should enable this setting?
>> >> >> >>
>> >> >> >> Thanks,
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> --
>> >> >> >>
>> >> >> >>
>> >> >> >> Nat?lia Oliveira
>> >> >> >> -------------- next part --------------
>> >> >> >> An HTML attachment was scrubbed...
>> >> >> >> URL:
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> <http://lists.okfn.org/pipermail/ckan-dev/attachments/20150903/72c21a2a/attachment-0001.html>
>> >> >> >>
>> >> >> >> ------------------------------
>> >> >> >>
>> >> >> >> Message: 5
>> >> >> >> Date: Fri, 4 Sep 2015 10:28:52 +0530
>> >> >> >> From: Naresh N <naresh919 at gmail.com>
>> >> >> >> To: ckan-dev at lists.okfn.org
>> >> >> >> Subject: [ckan-dev] issues while enabling ckanext-spatial
>> >> >> >> extension
>> >> >> >> Message-ID:
>> >> >> >>
>> >> >> >>
>> >> >> >> <CAKAPXzM1tO2jZhFC5a27ePDFQfKPqRXHurtuPN1KEXQd1M+Zcg at mail.gmail.com>
>> >> >> >> Content-Type: text/plain; charset="utf-8"
>> >> >> >>
>> >> >> >> Dear All,
>> >> >> >> I am enabling ckanext-spatial extension in one more machine. I
>> >> >> >> have
>> >> >> >> followed instructions given in
>> >> >> >> http://ckanext-spatial.readthedocs.org/en/latest/install.html
>> >> >> >> except
>> >> >> >> following instruction
>> >> >> >>
>> >> >> >> (pyenv) $ pip install -r pip-requirements.txt.
>> >> >> >> Instead of above I have used
>> >> >> >> (pyenv)$ pip install -r
>> >> >> >> /usr/lib/ckan/default/src/ckanext-spatial/pip-requirements.txt
>> >> >> >>
>> >> >> >> It is shown following error message
>> >> >> >>
>> >> >> >> Downloading/unpacking Shapely>=1.2.13 (from -r
>> >> >> >> /usr/lib/ckan/default/src/ckanext-spatial/pip-requirements.txt
>> >> >> >> (line
>> >> >> >> 3)) Running setup.py egg_info for package Shapely
>> >> >> >> ERROR:/usr/lib/ckan/default/build/Shapely/setup.py:Path to
>> >> >> >> geos-config
>> >> >> >> is not set
>> >> >> >> ERROR:/usr/lib/ckan/default/build/Shapely/setup.py:Cannot
>> >> >> >> find geos-config to get headers and check version.
>> >> >> >> ERROR:/usr/lib/ckan/default/build/Shapely/setup.py:If available,
>> >> >> >> specify a path to geos-config with a GEOS_CONFIG environment
>> >> >> >> variable
>> >> >> >>
>> >> >> >> After that I have also tried solution given in following link
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> http://stackoverflow.com/questions/25873463/libgeos-c-so-undefined-symbol-geosisclosed
>> >> >> >>
>> >> >> >> but it is also showing error. Please help me to resolve the issue
>> >> >> >>
>> >> >> >> Thanks&Regards,
>> >> >> >> Naresh
>> >> >> >>
>> >> >> >> Dear Ross Jones,
>> >> >> >> >
>> >> >> >> > Thanks a lot , the link helped me to resolve. Now I will work
>> >> >> >> > further
>> >> >> >> > to
>> >> >> >> > enable to map search widget.
>> >> >> >> >
>> >> >> >> > Thanks&Regards,
>> >> >> >> > Naresh
>> >> >> >> >
>> >> >> >> >
>> >> >> >> > On Mon, Aug 10, 2015 at 4:07 PM,
>> >> >> >> > <ckan-dev-request at lists.okfn.org>
>> >> >> >> > wrote:
>> >> >> >> >
>> >> >> >> >> Send ckan-dev mailing list submissions to
>> >> >> >> >> ckan-dev at lists.okfn.org
>> >> >> >> >>
>> >> >> >> >> To subscribe or unsubscribe via the World Wide Web, visit
>> >> >> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> >> or, via email, send a message with subject or body 'help' to
>> >> >> >> >> ckan-dev-request at lists.okfn.org
>> >> >> >> >>
>> >> >> >> >> You can reach the person managing the list at
>> >> >> >> >> ckan-dev-owner at lists.okfn.org
>> >> >> >> >>
>> >> >> >> >> When replying, please edit your Subject line so it is more
>> >> >> >> >> specific
>> >> >> >> >> than "Re: Contents of ckan-dev digest..."
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> Today's Topics:
>> >> >> >> >>
>> >> >> >> >> 1. Re: issues while enabling ckanext-spatial extension
>> >> >> >> >> (Ross
>> >> >> >> >> Jones)
>> >> >> >> >> 2. Re: problem with spatial previews (Matthew Fullerton)
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> ----------------------------------------------------------------------
>> >> >> >> >>
>> >> >> >> >> Message: 1
>> >> >> >> >> Date: Mon, 10 Aug 2015 11:00:25 +0100
>> >> >> >> >> From: Ross Jones <ross at servercode.co.uk>
>> >> >> >> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> >> >> >> Subject: Re: [ckan-dev] issues while enabling ckanext-spatial
>> >> >> >> >> extension
>> >> >> >> >> Message-ID:
>> >> >> >> >> <FF3D6F07-8AC6-4338-81E3-FA5C9FB1BF1E at servercode.co.uk>
>> >> >> >> >> Content-Type: text/plain; charset=us-ascii
>> >> >> >> >>
>> >> >> >> >> A quick google for the error (last line of log) with
>> >> >> >> >>
>> >> >> >> >> ckan AttributeError: /usr/lib/libgeos_c.so.1: undefined
>> >> >> >> >> symbol:
>> >> >> >> >> GEOSCovers
>> >> >> >> >>
>> >> >> >> >> returned
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> http://stackoverflow.com/questions/25873463/libgeos-c-so-undefined-symbol-geosisclosed
>> >> >> >> >>
>> >> >> >> >> which looks like it may have a solution to your problem.
>> >> >> >> >>
>> >> >> >> >> Hope this helps
>> >> >> >> >>
>> >> >> >> >> Ross
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> > On 10 Aug 2015, at 09:37, Naresh N <naresh919 at gmail.com>
>> >> >> >> >> > wrote:
>> >> >> >> >> >
>> >> >> >> >> > Dear All,
>> >> >> >> >> > Please help to resolve following issue.
>> >> >> >> >> >
>> >> >> >> >> > Thanks&Regards,
>> >> >> >> >> > Naresh
>> >> >> >> >> >
>> >> >> >> >> > On Thu, Aug 6, 2015 at 5:30 PM,
>> >> >> >> >> > <ckan-dev-request at lists.okfn.org>
>> >> >> >> >> wrote:
>> >> >> >> >> > Send ckan-dev mailing list submissions to
>> >> >> >> >> > ckan-dev at lists.okfn.org
>> >> >> >> >> >
>> >> >> >> >> > To subscribe or unsubscribe via the World Wide Web, visit
>> >> >> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> >> > or, via email, send a message with subject or body 'help' to
>> >> >> >> >> > ckan-dev-request at lists.okfn.org
>> >> >> >> >> >
>> >> >> >> >> > You can reach the person managing the list at
>> >> >> >> >> > ckan-dev-owner at lists.okfn.org
>> >> >> >> >> >
>> >> >> >> >> > When replying, please edit your Subject line so it is more
>> >> >> >> >> > specific
>> >> >> >> >> > than "Re: Contents of ckan-dev digest..."
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > Today's Topics:
>> >> >> >> >> >
>> >> >> >> >> > 1. Fwd: issues while enabling ckanext-spatial extension
>> >> >> >> >> > and
>> >> >> >> >> > customized url Base map (Naresh N)
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > ----------------------------------------------------------------------
>> >> >> >> >> >
>> >> >> >> >> > Message: 1
>> >> >> >> >> > Date: Thu, 6 Aug 2015 12:10:45 +0530
>> >> >> >> >> > From: Naresh N <naresh919 at gmail.com>
>> >> >> >> >> > To: ckan-dev at lists.okfn.org
>> >> >> >> >> > Subject: [ckan-dev] Fwd: issues while enabling
>> >> >> >> >> > ckanext-spatial
>> >> >> >> >> > extension and customized url Base map
>> >> >> >> >> > Message-ID:
>> >> >> >> >> > <CAKAPXzNkfe5WXZn=
>> >> >> >> >> QYZumg8iQzSB_tFRnCroB+oQhauPuvSNbw at mail.gmail.com>
>> >> >> >> >> > Content-Type: text/plain; charset="utf-8"
>> >> >> >> >> >
>> >> >> >> >> > Dear All,
>> >> >> >> >> >
>> >> >> >> >> > I have installed CKAN production set-up on Ubuntu 12.04
>> >> >> >> >> > 64
>> >> >> >> >> > bit
>> >> >> >> >> > machine.
>> >> >> >> >> >
>> >> >> >> >> > 1. ckanext-spatial extension issue
>> >> >> >> >> > And followed instructions given in
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > http://docs.ckan.org/projects/ckanext-spatial/en/latest/install.html
>> >> >> >> >> > to
>> >> >> >> >> > enable the spatial extenion of CKAN i.e ckanext-spatial.
>> >> >> >> >> > After
>> >> >> >> >> > doing
>> >> >> >> >> this
>> >> >> >> >> > if I am opening CKAN page it is showing messages 500-some
>> >> >> >> >> > internal
>> >> >> >> >> error
>> >> >> >> >> > occurred. Please find the attached error log file.
>> >> >> >> >> > and suggest me to resolve the issue.
>> >> >> >> >> > 2. Customized url for Base Map change
>> >> >> >> >> > a. Is it necessary to enable ckanext-spatial extension to
>> >> >> >> >> > change
>> >> >> >> >> > the
>> >> >> >> >> base
>> >> >> >> >> > map option.
>> >> >> >> >> >
>> >> >> >> >> > Please suggest me to resolve the issues
>> >> >> >> >> > Thanks in advance.
>> >> >> >> >> >
>> >> >> >> >> > Thanks&Regards,
>> >> >> >> >> > Naresh
>> >> >> >> >> > -------------- next part --------------
>> >> >> >> >> > An HTML attachment was scrubbed...
>> >> >> >> >> > URL: <
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150806/f1b9fd8c/attachment-0001.html
>> >> >> >> >> >
>> >> >> >> >> > -------------- next part --------------
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > mod_wsgi
>> >> >> >> >> (pid=3845): Target WSGI script '/etc/ckan/default/apache.wsgi'
>> >> >> >> >> cannot
>> >> >> >> >> be
>> >> >> >> >> loaded as Python module.
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > mod_wsgi
>> >> >> >> >> (pid=3845): Exception occurred processing WSGI script
>> >> >> >> >> '/etc/ckan/default/apache.wsgi'.
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > Traceback
>> >> >> >> >> > (most
>> >> >> >> >> recent call last):
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/etc/ckan/default/apache.wsgi", line 10, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > application
>> >> >> >> >> > =
>> >> >> >> >> loadapp('config:%s' % config_filepath)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 247, in loadapp
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> loadobj(APP, uri, name=name, **kw)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 272, in loadobj
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> context.create()
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 710, in create
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> self.object_type.invoke(self)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 146, in invoke
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> fix_call(context.object, context.global_conf,
>> >> >> >> >> **context.local_conf)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/util.py",
>> >> >> >> >> line 56, in fix_call
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > val =
>> >> >> >> >> callable(*args, **kw)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/config/middleware.py",
>> >> >> >> >> line
>> >> >> >> >> 58,
>> >> >> >> >> in
>> >> >> >> >> make_app
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> load_environment(conf, app_conf)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/config/environment.py",
>> >> >> >> >> line
>> >> >> >> >> 232,
>> >> >> >> >> in
>> >> >> >> >> load_environment
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> p.load_all(config)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 134,
>> >> >> >> >> in
>> >> >> >> >> load_all
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > load(*plugins)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 148,
>> >> >> >> >> in
>> >> >> >> >> load
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > service
>> >> >> >> >> > =
>> >> >> >> >> _get_service(plugin)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 254,
>> >> >> >> >> in
>> >> >> >> >> _get_service
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> plugin.load()(name=plugin_name)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/distribute-0.6.24-py2.7.egg/pkg_resources.py",
>> >> >> >> >> line 1989, in load
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > entry
>> >> >> >> >> > =
>> >> >> >> >> __import__(self.module_name, globals(),globals(),
>> >> >> >> >> ['__name__'])
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/src/ckanext-spatial/ckanext/spatial/plugin.py",
>> >> >> >> >> line 42, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> ckanext.spatial.lib import save_package_extent, validate_bbox,
>> >> >> >> >> bbox_query,
>> >> >> >> >> bbox_query_ordered
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/src/ckanext-spatial/ckanext/spatial/lib/__init__.py",
>> >> >> >> >> line 8, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.geometry import asShape
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geometry/__init__.py",
>> >> >> >> >> line
>> >> >> >> >> 4, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> > .base
>> >> >> >> >> import CAP_STYLE, JOIN_STYLE
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geometry/base.py",
>> >> >> >> >> line
>> >> >> >> >> 9,
>> >> >> >> >> in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.coords import CoordinateSequence
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/coords.py",
>> >> >> >> >> line
>> >> >> >> >> 8,
>> >> >> >> >> in
>> >> >> >> >> <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.geos import lgeos
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geos.py", line
>> >> >> >> >> 145,
>> >> >> >> >> in
>> >> >> >> >> <module>
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> prototype(_lgeos, geos_version)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/ctypes_declarations.py",
>> >> >> >> >> line 252, in prototype
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> lgeos.GEOSCovers.restype = c_byte
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/python2.7/ctypes/__init__.py", line 378, in
>> >> >> >> >> __getattr__
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > func
>> >> >> >> >> > =
>> >> >> >> >> self.__getitem__(name)
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/python2.7/ctypes/__init__.py", line 383, in
>> >> >> >> >> __getitem__
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > func
>> >> >> >> >> > =
>> >> >> >> >> self._FuncPtr((name_or_ordinal, self))
>> >> >> >> >> > [Thu Aug 06 11:45:37 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > AttributeError:
>> >> >> >> >> /usr/lib/libgeos_c.so.1: undefined symbol: GEOSCovers
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > mod_wsgi
>> >> >> >> >> (pid=3844): Target WSGI script '/etc/ckan/default/apache.wsgi'
>> >> >> >> >> cannot
>> >> >> >> >> be
>> >> >> >> >> loaded as Python module.
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > mod_wsgi
>> >> >> >> >> (pid=3844): Exception occurred processing WSGI script
>> >> >> >> >> '/etc/ckan/default/apache.wsgi'.
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > Traceback
>> >> >> >> >> > (most
>> >> >> >> >> recent call last):
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/etc/ckan/default/apache.wsgi", line 10, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > application
>> >> >> >> >> > =
>> >> >> >> >> loadapp('config:%s' % config_filepath)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 247, in loadapp
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> loadobj(APP, uri, name=name, **kw)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 272, in loadobj
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> context.create()
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 710, in create
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> self.object_type.invoke(self)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 146, in invoke
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> fix_call(context.object, context.global_conf,
>> >> >> >> >> **context.local_conf)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/util.py",
>> >> >> >> >> line 56, in fix_call
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > val =
>> >> >> >> >> callable(*args, **kw)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/config/middleware.py",
>> >> >> >> >> line
>> >> >> >> >> 58,
>> >> >> >> >> in
>> >> >> >> >> make_app
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> load_environment(conf, app_conf)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/config/environment.py",
>> >> >> >> >> line
>> >> >> >> >> 232,
>> >> >> >> >> in
>> >> >> >> >> load_environment
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> p.load_all(config)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 134,
>> >> >> >> >> in
>> >> >> >> >> load_all
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > load(*plugins)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 148,
>> >> >> >> >> in
>> >> >> >> >> load
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > service
>> >> >> >> >> > =
>> >> >> >> >> _get_service(plugin)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 254,
>> >> >> >> >> in
>> >> >> >> >> _get_service
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> plugin.load()(name=plugin_name)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/distribute-0.6.24-py2.7.egg/pkg_resources.py",
>> >> >> >> >> line 1989, in load
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > entry
>> >> >> >> >> > =
>> >> >> >> >> __import__(self.module_name, globals(),globals(),
>> >> >> >> >> ['__name__'])
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/src/ckanext-spatial/ckanext/spatial/plugin.py",
>> >> >> >> >> line 42, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> ckanext.spatial.lib import save_package_extent, validate_bbox,
>> >> >> >> >> bbox_query,
>> >> >> >> >> bbox_query_ordered
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/src/ckanext-spatial/ckanext/spatial/lib/__init__.py",
>> >> >> >> >> line 8, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.geometry import asShape
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geometry/__init__.py",
>> >> >> >> >> line
>> >> >> >> >> 4, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> > .base
>> >> >> >> >> import CAP_STYLE, JOIN_STYLE
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geometry/base.py",
>> >> >> >> >> line
>> >> >> >> >> 9,
>> >> >> >> >> in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.coords import CoordinateSequence
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/coords.py",
>> >> >> >> >> line
>> >> >> >> >> 8,
>> >> >> >> >> in
>> >> >> >> >> <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.geos import lgeos
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geos.py", line
>> >> >> >> >> 145,
>> >> >> >> >> in
>> >> >> >> >> <module>
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> prototype(_lgeos, geos_version)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/ctypes_declarations.py",
>> >> >> >> >> line 252, in prototype
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> lgeos.GEOSCovers.restype = c_byte
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/python2.7/ctypes/__init__.py", line 378, in
>> >> >> >> >> __getattr__
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > func
>> >> >> >> >> > =
>> >> >> >> >> self.__getitem__(name)
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/python2.7/ctypes/__init__.py", line 383, in
>> >> >> >> >> __getitem__
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > func
>> >> >> >> >> > =
>> >> >> >> >> self._FuncPtr((name_or_ordinal, self))
>> >> >> >> >> > [Thu Aug 06 11:45:49 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > AttributeError:
>> >> >> >> >> /usr/lib/libgeos_c.so.1: undefined symbol: GEOSCovers
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > mod_wsgi
>> >> >> >> >> (pid=3844): Target WSGI script '/etc/ckan/default/apache.wsgi'
>> >> >> >> >> cannot
>> >> >> >> >> be
>> >> >> >> >> loaded as Python module.
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > mod_wsgi
>> >> >> >> >> (pid=3844): Exception occurred processing WSGI script
>> >> >> >> >> '/etc/ckan/default/apache.wsgi'.
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > Traceback
>> >> >> >> >> > (most
>> >> >> >> >> recent call last):
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/etc/ckan/default/apache.wsgi", line 10, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > application
>> >> >> >> >> > =
>> >> >> >> >> loadapp('config:%s' % config_filepath)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 247, in loadapp
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> loadobj(APP, uri, name=name, **kw)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 272, in loadobj
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> context.create()
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 710, in create
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> self.object_type.invoke(self)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/loadwsgi.py",
>> >> >> >> >> line 146, in invoke
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> fix_call(context.object, context.global_conf,
>> >> >> >> >> **context.local_conf)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/paste/deploy/util.py",
>> >> >> >> >> line 56, in fix_call
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > val =
>> >> >> >> >> callable(*args, **kw)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/config/middleware.py",
>> >> >> >> >> line
>> >> >> >> >> 58,
>> >> >> >> >> in
>> >> >> >> >> make_app
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> load_environment(conf, app_conf)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/config/environment.py",
>> >> >> >> >> line
>> >> >> >> >> 232,
>> >> >> >> >> in
>> >> >> >> >> load_environment
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> p.load_all(config)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 134,
>> >> >> >> >> in
>> >> >> >> >> load_all
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > load(*plugins)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 148,
>> >> >> >> >> in
>> >> >> >> >> load
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > service
>> >> >> >> >> > =
>> >> >> >> >> _get_service(plugin)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/ckan/plugins/core.py", line
>> >> >> >> >> 254,
>> >> >> >> >> in
>> >> >> >> >> _get_service
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > return
>> >> >> >> >> plugin.load()(name=plugin_name)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/lib/python2.7/site-packages/distribute-0.6.24-py2.7.egg/pkg_resources.py",
>> >> >> >> >> line 1989, in load
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > entry
>> >> >> >> >> > =
>> >> >> >> >> __import__(self.module_name, globals(),globals(),
>> >> >> >> >> ['__name__'])
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/src/ckanext-spatial/ckanext/spatial/plugin.py",
>> >> >> >> >> line 42, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> ckanext.spatial.lib import save_package_extent, validate_bbox,
>> >> >> >> >> bbox_query,
>> >> >> >> >> bbox_query_ordered
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/lib/ckan/default/src/ckan/src/ckanext-spatial/ckanext/spatial/lib/__init__.py",
>> >> >> >> >> line 8, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.geometry import asShape
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geometry/__init__.py",
>> >> >> >> >> line
>> >> >> >> >> 4, in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> > .base
>> >> >> >> >> import CAP_STYLE, JOIN_STYLE
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geometry/base.py",
>> >> >> >> >> line
>> >> >> >> >> 9,
>> >> >> >> >> in <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.coords import CoordinateSequence
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/coords.py",
>> >> >> >> >> line
>> >> >> >> >> 8,
>> >> >> >> >> in
>> >> >> >> >> <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > from
>> >> >> >> >> shapely.geos import lgeos
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/geos.py", line
>> >> >> >> >> 145,
>> >> >> >> >> in
>> >> >> >> >> <module>
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> prototype(_lgeos, geos_version)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> "/usr/local/lib/python2.7/dist-packages/shapely/ctypes_declarations.py",
>> >> >> >> >> line 252, in prototype
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> lgeos.GEOSCovers.restype = c_byte
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/python2.7/ctypes/__init__.py", line 378, in
>> >> >> >> >> __getattr__
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > func
>> >> >> >> >> > =
>> >> >> >> >> self.__getitem__(name)
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1] File
>> >> >> >> >> "/usr/lib/python2.7/ctypes/__init__.py", line 383, in
>> >> >> >> >> __getitem__
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > func
>> >> >> >> >> > =
>> >> >> >> >> self._FuncPtr((name_or_ordinal, self))
>> >> >> >> >> > [Thu Aug 06 11:45:50 2015] [error] [client 127.0.0.1]
>> >> >> >> >> > AttributeError:
>> >> >> >> >> /usr/lib/libgeos_c.so.1: undefined symbol: GEOSCovers
>> >> >> >> >> >
>> >> >> >> >> > ------------------------------
>> >> >> >> >> >
>> >> >> >> >> > Subject: Digest Footer
>> >> >> >> >> >
>> >> >> >> >> > _______________________________________________
>> >> >> >> >> > ckan-dev mailing list
>> >> >> >> >> > ckan-dev at lists.okfn.org
>> >> >> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> > ------------------------------
>> >> >> >> >> >
>> >> >> >> >> > End of ckan-dev Digest, Vol 58, Issue 6
>> >> >> >> >> > ***************************************
>> >> >> >> >> >
>> >> >> >> >> > _______________________________________________
>> >> >> >> >> > ckan-dev mailing list
>> >> >> >> >> > ckan-dev at lists.okfn.org
>> >> >> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> ------------------------------
>> >> >> >> >>
>> >> >> >> >> Message: 2
>> >> >> >> >> Date: Mon, 10 Aug 2015 10:20:54 +0000
>> >> >> >> >> From: Matthew Fullerton <matthew at smartlane.de>
>> >> >> >> >> To: CKAN Development Discussions <ckan-dev at lists.okfn.org>
>> >> >> >> >> Subject: Re: [ckan-dev] problem with spatial previews
>> >> >> >> >> Message-ID: <1439202038327.90438 at smartlane.de>
>> >> >> >> >> Content-Type: text/plain; charset="iso-8859-1"
>> >> >> >> >>
>> >> >> >> >> Dear Armin,
>> >> >> >> >> Are you using ckanext-geoview or ckanext-spatial?
>> >> >> >> >>
>> >> >> >> >> For the WMS viewer I think you need to specify which file
>> >> >> >> >> types
>> >> >> >> >> you
>> >> >> >> >> want
>> >> >> >> >> to offer previews for, e.g.:
>> >> >> >> >> ckanext.geoview.ol_viewer.formats = wms kml
>> >> >> >> >> https://github.com/ckan/ckanext-geoview#openlayers-viewer
>> >> >> >> >>
>> >> >> >> >> In general, and specifically for the GeoJSON problem, check
>> >> >> >> >> that
>> >> >> >> >> the
>> >> >> >> >> file
>> >> >> >> >> formats are set for the resource. I think it needs to be
>> >> >> >> >> 'geojson'
>> >> >> >> >> for
>> >> >> >> >> a
>> >> >> >> >> GeoJSON file and 'wms' for the WMS resource.
>> >> >> >> >>
>> >> >> >> >> Best,
>> >> >> >> >> Matt
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> Projekt SMARTLANE
>> >> >> >> >>
>> >> >> >> >> matthew at smartlane.de<mailto:florian at smartlane.de>
>> >> >> >> >> T +49.89.289.28575
>> >> >> >> >> F +49.89.289.22333
>> >> >> >> >> www.smartlane.de<http://www.smartlane.de/>
>> >> >> >> >>
>> >> >> >> >> EXIST-Gr?ndungsvorhaben "Tapestry"
>> >> >> >> >> c/o Lehrstuhl f?r Verkehrstechnik
>> >> >> >> >> Technische Universit?t M?nchen
>> >> >> >> >> Arcisstra?e 21
>> >> >> >> >> 80333 M?nchen
>> >> >> >> >>
>> >> >> >> >> Gef?rdert vom Bundesministerium f?r Wirtschaft und Technologie
>> >> >> >> >> aufgrund eines Beschlusses des Deutschen Bundestages.
>> >> >> >> >>
>> >> >> >> >> ________________________________
>> >> >> >> >> Von: ckan-dev <ckan-dev-bounces at lists.okfn.org> im Auftrag von
>> >> >> >> >> Armin
>> >> >> >> >> Retterath <armin.retterath at gmail.com>
>> >> >> >> >> Gesendet: Freitag, 7. August 2015 12:07
>> >> >> >> >> An: CKAN Development Discussions
>> >> >> >> >> Betreff: [ckan-dev] problem with spatial previews
>> >> >> >> >>
>> >> >> >> >> hello together,
>> >> >> >> >> i freshly installed ckan 2.4.0 with the spatial extensions on
>> >> >> >> >> an
>> >> >> >> >> debian
>> >> >> >> >> 8
>> >> >> >> >> environment (including datastore).
>> >> >> >> >> in the frontend the options for show wms, geojson, ... are not
>> >> >> >> >> displayed
>> >> >> >> >> :-( .
>> >> >> >> >> it seems to be, that ckan don't find the plugins?
>> >> >> >> >> here are my entries in the development.ini:
>> >> >> >> >>
>> >> >> >> >> ckan.plugins = stats text_view datastore image_view
>> >> >> >> >> recline_view
>> >> >> >> >> spatial_metadata spatial_query geo_view geojson_view
>> >> >> >> >> resource_proxy
>> >> >> >> >>
>> >> >> >> >> # Define which views should be created by default
>> >> >> >> >> # (plugins must be loaded in ckan.plugins)
>> >> >> >> >> ckan.views.default_views = ckanext-geoview geojson_view
>> >> >> >> >> geo_view
>> >> >> >> >> image_view text_view recline_view recline_map_view
>> >> >> >> >>
>> >> >> >> >> thanx in advance
>> >> >> >> >> armin
>> >> >> >> >> -------------- next part --------------
>> >> >> >> >> An HTML attachment was scrubbed...
>> >> >> >> >> URL: <
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> http://lists.okfn.org/pipermail/ckan-dev/attachments/20150810/03e53802/attachment.html
>> >> >> >> >> >
>> >> >> >> >>
>> >> >> >> >> ------------------------------
>> >> >> >> >>
>> >> >> >> >> Subject: Digest Footer
>> >> >> >> >>
>> >> >> >> >> _______________________________________________
>> >> >> >> >> ckan-dev mailing list
>> >> >> >> >> ckan-dev at lists.okfn.org
>> >> >> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >> ------------------------------
>> >> >> >> >>
>> >> >> >> >> End of ckan-dev Digest, Vol 58, Issue 9
>> >> >> >> >> ***************************************
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >> -------------- next part --------------
>> >> >> >> An HTML attachment was scrubbed...
>> >> >> >> URL:
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >> <http://lists.okfn.org/pipermail/ckan-dev/attachments/20150904/a45e8a35/attachment.html>
>> >> >> >>
>> >> >> >> ------------------------------
>> >> >> >>
>> >> >> >> Subject: Digest Footer
>> >> >> >>
>> >> >> >> _______________________________________________
>> >> >> >> ckan-dev mailing list
>> >> >> >> ckan-dev at lists.okfn.org
>> >> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >>
>> >> >> >>
>> >> >> >> ------------------------------
>> >> >> >>
>> >> >> >> End of ckan-dev Digest, Vol 59, Issue 3
>> >> >> >> ***************************************
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > _______________________________________________
>> >> >> > ckan-dev mailing list
>> >> >> > ckan-dev at lists.okfn.org
>> >> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >> >
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> Subject: Digest Footer
>> >> >>
>> >> >> _______________________________________________
>> >> >> ckan-dev mailing list
>> >> >> ckan-dev at lists.okfn.org
>> >> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >>
>> >> >>
>> >> >> ------------------------------
>> >> >>
>> >> >> End of ckan-dev Digest, Vol 59, Issue 7
>> >> >> ***************************************
>> >> >
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > ckan-dev mailing list
>> >> > ckan-dev at lists.okfn.org
>> >> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >> >
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> Subject: Digest Footer
>> >>
>> >> _______________________________________________
>> >> ckan-dev mailing list
>> >> ckan-dev at lists.okfn.org
>> >> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> >> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >>
>> >>
>> >> ------------------------------
>> >>
>> >> End of ckan-dev Digest, Vol 59, Issue 9
>> >> ***************************************
>> >
>> >
>> >
>> > _______________________________________________
>> > ckan-dev mailing list
>> > ckan-dev at lists.okfn.org
>> > https://lists.okfn.org/mailman/listinfo/ckan-dev
>> > Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>> >
>>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> ckan-dev mailing list
>> ckan-dev at lists.okfn.org
>> https://lists.okfn.org/mailman/listinfo/ckan-dev
>> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>>
>>
>> ------------------------------
>>
>> End of ckan-dev Digest, Vol 59, Issue 11
>> ****************************************
>
>
>
> _______________________________________________
> ckan-dev mailing list
> ckan-dev at lists.okfn.org
> https://lists.okfn.org/mailman/listinfo/ckan-dev
> Unsubscribe: https://lists.okfn.org/mailman/options/ckan-dev
>
More information about the ckan-dev
mailing list